Tuscan metal undertrays

[Let off some steam Bennett]

I'm trying to get hold of the 2 metal undertrays that fit to the chassis on a mk1 tuscan. I believe these are now unavailable as new items. Dom at powers has told me somebody on pistonheads makes them, any ideas. Thanks Simon

[mk1fan]

You can try the breakers - TVR Glen or Steve Strange. Not sure if they are different to the Tam, Sag or T350. Have you tried Motaclan for them. I have vague recall of searching through their parts recently and seeing them [listed] for the Tam. Might have been Racetech.

Nothing particularily special about them though. Stainless plate, sides bent up. Mounting holes drilled. Some cut outs for weight saving and to allow for CATs.

Cheap enough to get laser / jetted out of a piece of flat plate with larger end tabs to make folding easier. Then trim off the excess tabs. Just need a set to copy / make drawing from.

[Let off some steam Bennett]

mk1fan said:

You can try the breakers - TVR Glen or Steve Strange. Not sure if they are different to the Tam, Sag or T350. Have you tried Motaclan for them. I have vague recall of searching through their parts recently and seeing them [listed] for the Tam. Might have been Racetech.

Nothing particularily special about them though. Stainless plate, sides bent up. Mounting holes drilled. Some cut outs for weight saving and to allow for CATs.

Cheap enough to get laser / jetted out of a piece of flat plate with larger end tabs to make folding easier. Then trim off the excess tabs. Just need a set to copy / make drawing from.

Thanks for the info, i'm trying to buy new or get some made as my car is having a body off restoration and it would be nice to have new ones.
None of the TVR parts suppliers have them in stock.

[Basil Brush]

Motaclan are showing them as in stock.

https://motaclan.com/product/stiffening-plate-tran...

https://motaclan.com/product/stiffening-plate-unde...

[Let off some steam Bennett]

Basil Brush said:

Motaclan are showing them as in stock.

https://motaclan.com/product/stiffening-plate-tran...

https://motaclan.com/product/stiffening-plate-unde...

Great, thanks mate

[Let off some steam Bennett]

Basil Brush said:

Motaclan are showing them as in stock.

https://motaclan.com/product/stiffening-plate-tran...

https://motaclan.com/product/stiffening-plate-unde...

Thanks mate, i ordered them last night

[Let off some steam Bennett]

If anybody needs the undertrays they have 10 more sets in stock at Motoclan

[mk1fan]

mk1fan said:

Have you tried Motaclan for them.

So no then

[Let off some steam Bennett]

mk1fan said:

So no then

Sorry mate, i did look on there website yesterday but could not find them. Ordered now