speedo-plates in KM/h are ready !!!!!!!!!

[ochten]

the step by step manual received from Rens how install the km/u plate

[rens914]

ochten said:

the step by step manual received from Rens how install the km/u plate

only sent it to people who asked for it or with 2 left hands.
did the conversion yesterday myself (lack of time) and everything is OK. no problems with the reading. turned the needle back to 0 after tightening the fixing screw.
rens

Edited by rens914 on Monday 22 March 09:25

[tripleblack]

Yes, very straightforward job to do. Even without the manual. Works fine and looks great. Finished mine today. Thanks Rens (goed gedaan jochie!!)

[Avalanche]

Rens, fitted mine today WITH the manual (very nice piece of work, the dial and the manual that is!)
goed gedaan jochie (I have no idea what that means but I'm assuming positive!)
Many thanks

p.s. I went to
http://www.actua-stage-pilotage.fr/index.html
on sunday and test-drove an Aston, Lambo and Fezza around a circuit (birthday prezzie from g/f)
The Aston was heavy...heavy... The Lambo a bit out of step and crappy flappy gearbox, lurching all the time, the Fezza was quite good I have to say, but for the price performance all round wasn't really any bette than the Tuscan (which was the best ride back to Geneva), especially when u consider the price. And I think it had more photos taken in the carpark than the circuit cars Big pat on all our backs - affirms we have the best IMO!

[rens914]

manual is a super piece of work and made bij ronspeedsix
yust combined forces
rens

[Udo]

...got Woki`s and mine plates today. Looks very good, thank you rens. And thank you for the manual too. Hope I will not have "two left hands" for fixing it.

Udo

[fraxton]

Hi rens, my plate arrived today, I must say it looks really smart. Many thanks again.
Francesco

[rens914]

fraxton said:

Hi rens, my plate arrived today, I must say it looks really smart. Many thanks again.
Francesco

yust reserve a nice barolo and one ounce of black pig ham to consume together once i visit you
gr rens

[fraxton]

Haha, you can count on it, by the way Barolo always at home, it seems we got some other things in common, must meet up one day. Tot ziens
Francesco

[CoasTVR]

no pics yet, but together with a new LCD (no lines anymore!) which cost me more time to install than the @#$%^&* hour some guys predicted, the new km/h dash was ready this morning to roll! Beautiful weather, roof stowed away. Rens, now it's easy to brake and adjust to the right speed when you see the cameras: just look at the needle instead of the right hand corner of one of the POD screens!
Great job, done.
Buss

[rens914]

like i look at it i still have 2 plates available
the people on the reserve are beiing served at the moment.
what's that with people putting themselves on lists and not responding anymore ??
rens

[12Esc]

i guess i'm on the reserve list? thx
(you have to start somewhere, if you want to end up with a Tuscan )

Edited by 12Esc on Sunday 28th March 09:30

[rens914]

12Esc said:

i guess i'm on the reserve list? thx
(you have to start somewhere, if you want to end up with a Tuscan )

Edited by 12Esc on Sunday 28th March 09:30

yep
still have plates of people not processing
rens

[rens914]

the first batch is sold out now
if people are interested plaese send me a pm
there are 5 people on the waiting list now
the moment i have 20 enthousiasts i will have new ones made
gr rens

[LaoMa]

rens914 said:

yust didnt like kph
16 plates have gone in about 1 day (and 2 people on the waiting list

Edited by rens914 on Tuesday 16th March 09:42

[LaoMa]

Hi,
I'm Helmut from Germany and owner of a TVR Tuscan MK1.
I found your information about a speedo-plate for this car today. My question, is it to late to ask for a plate in gold with KM/h? If you have a chance to get this plate, how much is it?

Thank you for your understanding and help.

Kind regards
Helmut

[Dannyk]

I just got off the phone with Rens to discuss the manufacturing of another batch of these dials. We agreed that I would take the lead. Colour can be either silver or gold and the price will be between 100 and 120 euro, depending on the nr of people who would be interested to buy one. If we can get to 10 dial plates prior to the end of November, then you can have your new km p/h dial under the X-mas tree.

Please send me an e-mail via Pistonheads if you are seriously interested!

(edited to adjust a minor error)

Edited by Dannyk on Tuesday 10th November 08:09

[maxkressbronn]

Looks like we have a little overlap in producing them plates, I just agreed with a couple of guys who contacted me for plates to have some more manufactured, both in gold and silver at 85 Euro's per plate plus shipping. I expect them to be ready before christmas. If any body is interested to join in just contact me through this or in the german TVR forum.

[Dannyk]

Hi Max, that is even better! Will send you an e-mail as I would definitely like to order one.

[PieterLOL]

How difficult/expensive is it to have these made as one-off later on? I'm hoping/planning to be a Tuscan owner in 4-6 years so just wondering if I should start sourcing parts already :-)