|
pmessling
Original Poster
1,101 posts
72 months
|
Whilst removing the whole handbrake assembly off of the hub i snapped little piece of the metal off on the part the the cable goes into that separates the shoes,
Does anyone know where this part is from at all, or what the assembly may have also been used from?
Peter
|
|
|
cerdad
219 posts
70 months
|
Quinten Hazel kitBFK-351,or APEC part no.766, these are fitting kits ,the shoes are peugeot605 ,Ferodo part no.FSB425
|
|
|
Ireland
3,239 posts
83 months
|
Is the bit you broke part of the fitting kit?
If so then the above is what you need but if not do you have any pics you can post to show exactly what has broken?
|
|
|
Mad Mark
2,100 posts
101 months
|
|
|
pmessling
Original Poster
1,101 posts
72 months
|
No don't think its in the fitting kits, as its technically part of the car, as it shouldn't need replacing, its the part the the cable nipple goes into, which is made up of two parts with the part need shown, the bit that has snapped off is about half inch long, and straight and you can see where it has broken off from.  
|
Advertisement
|
|
|
pmessling
Original Poster
1,101 posts
72 months
|
I believe the part is called the show anchor, i had a look at jeep grand cherokee parts but can't tell, i'll wipe the wheel of my jeep and have a look, that or i'll get a second hand one.
|
|
|
SL500
456 posts
134 months
|
I am sure that they are Jeep
|
|
|
petelem
17 posts
28 months
|
pmessling said: No don't think its in the fitting kits, as its technically part of the car, as it shouldn't need replacing, its the part the the cable nipple goes into, which is made up of two parts with the part need shown, the bit that has snapped off is about half inch long, and straight and you can see where it has broken off from. Hi Peter, did you find a solution, part? Same happend to me during restoration. Cheers Peter
|
|
|
cshaw600
106 posts
14 months
|
Would be interested if anybody has found the part as mine is broken the same thanks
|
|
|
pmessling
Original Poster
1,101 posts
72 months
|
No i wasn't able to come up with another, ended up welding the tab back on. If it helps you out i can weld yours back on if you want to send them to me?
|
|
|
cshaw600
106 posts
14 months
|
Thanks for the offer will have a word with the welder at work thanks
|
|
|
petelem
17 posts
28 months
|
Thanks too. But I´ve lost the tab unfortunately.
Peter
|
|
|
ukkid35
1,568 posts
42 months
|
Following cerdad's identification of the shoes, I'd be down the scrappy looking for a Peugot 605 as the 'show anchor' may well be the same.
|
|
|
pmessling
Original Poster
1,101 posts
72 months
|
petelem said: Thanks too. But I´ve lost the tab unfortunately.
Peter Soon make another one out of a scrap bit of metal.
|
|
|
esso
1,212 posts
86 months
|
Anyone know where you can source this item and also the adjuster that separates the bottom of the shoes? You can buy new handbrake shoes,springs and pins and backplate but i cant source these items.
|
|
|
ridds
6,532 posts
113 months
|
I nearly found these a little while ago. Close, Maser 3200  Very Close, Saab 9000  Crank very different though, not sure if TVR modded it?  BMW??? Definitely the lower adjuster.  There's just tooooo many to choose from.
|
|
|
ridds
6,532 posts
113 months
|
BMW E9 
|
|
|
esso
1,212 posts
86 months
|
I have bought a second hand hub for the parts as i need the backplate too,but it would be good if we could source replacement items for the adjuster and the handbrake cable actuating mechanism.
|
|
|
petelem
17 posts
28 months
|
BMW E9 looks close but the important "tab" is missing. Maybe the Saab part showed above is the one. I found this: Saab partNr.: 90496947 
|
|
