Wanted TVR Cerbera Carbon Fibre Fascia

[pmessling]

I was able to find somewhere that cnc cuts carbon sheet using the drawing I have for the metal dash I supply.

Was in the region of £130 heater and dash panel

[Incognegro]

pmessling said:

I was able to find somewhere that cnc cuts carbon sheet using the drawing I have for the metal dash I supply.

Was in the region of £130 heater and dash panel

Looks like Santa will be getting me an engine turned dash for Xmas... along with an itg long life air filter for the Cerb! and the other snags that need to get done at 6k service.

Cheers Peter.

[carbonnoob]

Real carbon fibre dash kit for Cerbera, which is engraved with TVR logo for £125 delivered from Juno Composites.

http://www.ebay.co.uk/itm/Carbon-Fibre-TVR-Cerbera...

I think there will be two types; 1 which will be a bond on veneer and a thicker one meant as a complete replacement of the original steel dash and switch panel.

Edited by carbonnoob on Thursday 4th December 22:49

[jackwibble]

Looks nice and "proper" carbon to boot!

[Mr Cerbera]

X19 Lido said:

…. if anyone is interested let me know.

I have had the instrument panels, window switches, wheel centre and gauge pods carbon dipped to match the doors

Hi X19 Lido
YHM
Paul J

[ukkid35]

I'm not a big fan of the wood veneer, but the aluminium fascia looks completely out of place. Perhaps this would be a subtle alternative, I'd love to see it in situ.

[Gazzab]

ukkid35 said:

I'm not a big fan of the wood veneer, but the aluminium fascia looks completely out of place. Perhaps this would be a subtle alternative, I'd love to see it in situ.

http://s687.photobucket.com/user/Toehold1/media/Cerbera/SAM_0528_zps70d838df.jpg.html

[Gazzab]

[Incognegro]

ukkid35 said:

I'm not a big fan of the wood veneer, but the aluminium fascia looks completely out of place. Perhaps this would be a subtle alternative, I'd love to see it in situ.

I was in the same boat then saw a great engined turned version. Then noticed if it's ok for the veyron my Cerb can pull it off especially as I'll be adding some koenigsegg inspired carbon touches in a not already done style oh and seeing Ada e the Trimmer.

I'm keen to make the Cerb look every bit as modern as Mr Edgars new beasts

[cerberaperv]

I`ve a brushed ali instrument panel and heater control surround if anyone is interested.

[Incognegro]

pmessling said:

I was able to find somewhere that cnc cuts carbon sheet using the drawing I have for the metal dash I supply.

Was in the region of £130 heater and dash panel

Hi Peter,

Just letting you know payment made for engine turned dash but aint heard from you since??? I need to have it by end of this week please as its being fitted at 6k service booked for next week.

Let me know ASAP Thanks

A

[pmessling]

Sorry for not replying. I have emailed you back.

Peter.

[Incognegro]

Thanks mate looks fantastic, all arrived a few days ago and its all at Topcats Racing to be fitted during 6k service. I'll be carbon dipping the dash that it replaces.

[Stunned Monkey]

Gazzab said:

Loving the door armrest! Something I really miss in my car - also reckon TVR missed a trick as it'd be like sitting in a glorious armchair!

[Incognegro]

Stunned Monkey said:

Loving the door armrest! Something I really miss in my car - also reckon TVR missed a trick as it'd be like sitting in a glorious armchair!

Brilliant interior Gaz!

Its a great idea but I reckon TVR did it on purpose, the never tested leaning on it while driving so the door may have dropped off... not being funny as my Dad was once doing 60mph and noticed the N/S window randomly coming down!!

[Mr Cerbera]

Oooh Gaz,

Where are those seats from ?


and
Did you have any probs with the width of the base ??

Ta !

PJ

[ianwhitewick]

I love the Tango cerb. I wouldn't have chosen orange but it does suit the cerbera. Far better then the green!

Love the quilted seats and headlining.