ECU Diagnostic Software Re-Write
Discussion
fr0zent0ast said:
I'm sure it doesn't, but wanted to ask just in case - Will the device get any charge from the ECU? I.e will it charge whilst connected? I'm trying to work out how to fit a permanent screen.....
To answer (from yesterday):aide said:
I've been thinking about how to solve the problem of being able to charge the android device at the same time as using the USB port in host mode. It's not possible without lots of hackerydickery..!
But I did come across a Qi Wireless Car Charger. That's one of the more expensive ones, but there are cheaper options. I'll probably test this in the next few days to see if it's possible to wireless charge and use the USB port in host mode at the same time. If it is it would be great.
I'm just mounting my phone on the dash. But I did come across a Qi Wireless Car Charger. That's one of the more expensive ones, but there are cheaper options. I'll probably test this in the next few days to see if it's possible to wireless charge and use the USB port in host mode at the same time. If it is it would be great.
It's really as simple as, download the app, mount your phone on the dash and plug it in
So, all I do is, hop in the car, mount the phone, run the app and start the engine.
All you need is a cable.
It's that simple!
To answer (from yesterday):
aide said:
I've been thinking about how to solve the problem of being able to charge the android device at the same time as using the USB port in host mode. It's not possible without lots of hackerydickery..!
Sorry, missed this. Looking forward to you releasing this on the PlayStore.fr0zent0ast said:
To answer (from yesterday):
It's really fine, I've been posting far to frequently on this thread, and sometimes there's too much information bundled together aide said:
I've been thinking about how to solve the problem of being able to charge the android device at the same time as using the USB port in host mode. It's not possible without lots of hackerydickery..!
Sorry, missed this. Looking forward to you releasing this on the PlayStore.I'm looking forward to getting it released as well. It's been really handy, before you even start the car or when you're stuck in traffic, you have every piece of engine sensor data available in realtime.
RFC1 said:
Have i got this correct ? I need an android device, and a cable as per links earlier in the thread. Then simply plug the cable into the ecu ?? or is there a plug in the wiring loom ?? 2001 4.5 car.
Cheers Sandy
Hi Sandy,Cheers Sandy
Yes, more or less.
You need a USB host enabled android device, like a samsung galaxy S3, S4 or S5 and the cables detailed above. If your car is a later model with a three pin ecu connector then you also need another special three pin to 9pin RS232 cable. I'm not sure if you can still buy them anymore, but here's a thread with details on how to make one for yourself.
Hth
Best regards
Aide
aide said:
Hi Sandy,
Yes, more or less.
You need a USB host enabled android device, like a samsung galaxy S3, S4 or S5 and the cables detailed above. If your car is a later model with a three pin ecu connector then you also need another special three pin to 9pin RS232 cable. I'm not sure if you can still buy them anymore, but here's a thread with details on how to make one for yourself.
Hth
Best regards
Aide
So in essence i need 3 different cables to make it work ??Yes, more or less.
You need a USB host enabled android device, like a samsung galaxy S3, S4 or S5 and the cables detailed above. If your car is a later model with a three pin ecu connector then you also need another special three pin to 9pin RS232 cable. I'm not sure if you can still buy them anymore, but here's a thread with details on how to make one for yourself.
Hth
Best regards
Aide
Cheers Sandy
I have a Galaxy S5, the cable I currently use from ECU to laptop so I think all I need is the cable to convert the USB to micro USB:
http://www.amazon.co.uk/gp/product/B005FUNQXS/ref=...
What is the name of the app in the play store so I can download it?
http://www.amazon.co.uk/gp/product/B005FUNQXS/ref=...
What is the name of the app in the play store so I can download it?
TimJM said:
I have a Galaxy S5, the cable I currently use from ECU to laptop so I think all I need is the cable to convert the USB to micro USB:
http://www.amazon.co.uk/gp/product/B005FUNQXS/ref=...
What is the name of the app in the play store so I can download it?
Yes, that’s it in a nutshell Tim.http://www.amazon.co.uk/gp/product/B005FUNQXS/ref=...
What is the name of the app in the play store so I can download it?
The app iS not on the App Store just yet. I’m still finishing off a few bits and pieces. It won’t be too long until I get it released.
optimax sniffer said:
When it is released could list the devices that it is comparable with?
I'm looking to get a cheap android phone / tablet from fleabay to run it
Can do. It should be ok as long as the device has USB host capabilities. Best to wait until I confirm it works on a certian deveice before you buy it though?I'm looking to get a cheap android phone / tablet from fleabay to run it
aide said:
Yes, that’s it in a nutshell Tim.
The app iS not on the App Store just yet. I’m still finishing off a few bits and pieces. It won’t be too long until I get it released.
Cheers. If you want another tester before you get it in the app store just send me a link to the apk file. As well as my S5 I also have a Nexus 7, a galaxy s3, a galaxy s2 and an asus eee pad if you want me to check more devices.The app iS not on the App Store just yet. I’m still finishing off a few bits and pieces. It won’t be too long until I get it released.
I need to reconnect the diags tomorrow to check the temps the fans kick in at.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff