ECU Diagnostic Software Re-Write

[aide]

Jooles81 said:

Done!

How can I access the gps layout? Is it some special page?

Julien

Cool

For GPS layout, simply:

Menu -> Options -> Reset GPS Layout

[aide]

philadcock said:

Hi Aide - I've just installed this too - an excellent piece of work. Followed the instructions, bought a Nexus 7 and it worked first time.

I'm going to build something to take the log outputs and graph them when I get a few moments spare. I've got an issue with adaptives maxing out and I want to be able to quickly visualise what the car is doing when faults are logged.

Are you interested in bug reports? If so do I post them here or email?

Cheers,

Phil.

Hi Phil,
Glad you're up and running
Yes, anything you find please feel free to email me or post here.
I'll have a look
Aide

[thefrog]

Hi Aide, I've recently had troubles with the app launching then dying immediately. Whether the cable is connected or not makes no difference, any ideas / hints on what to look for diagnosis-wise ?

Thanks
Greg

[FarmyardPants]

I think it needs an internet connection from time to time to verify the installation as legit - could be that?

[tangerinedream]

Yes - that happened to me. I hooked up to the Internet and accepted some new terms and conditions from Google and it's now working again.

[thefrog]

Thanks chaps, will try that. I was at an airfield and my Nexus doesn't have 3G/4G so it could well have been that.

Greg

[thefrog]

thefrog said:

Thanks chaps, will try that. I was at an airfield and my Nexus doesn't have 3G/4G so it could well have been that.

Greg

That was it.

[aide]

aide said:

RS-AJP (v1.06) is now available!
In this release:
Added new widgets for: MPH, KPH, LateralG, Acceleration, Bearing, Altitude, Accuracy, Number of Satellties, Gps Location and Time
Also added Data Logging, a Frost Status Indicator on the Air Temp Dials and an option to reset to a STD or GPS layout.

Just a short note to repost this.
RS-AJP has data logging available. It's been there for a while.

To Start:



To Stop: (notice the red REC dot in the top right hand corner)


The log is stored in the rs-ajp/log dir and is in csv:


Just to know:
-o- The file name is has a YYYY-MM-DD HH-MM-SS.rs-ajp.csv format
-o- TIMEMS: Milliseconds since 01 01 1970
-o- Speed is in Meters per second

So, you have milisecond granularity logging of every sensor in the engine along with associated speed, gps (longitude and latitude), elevation, Plus acceleration and lateral G all logged in a nice tidy csv file...

HTH!
Aide

[Jabbah]

Aide, can you read out the full adaptive maps or are there any plans to add this?

[aide]

Jabbah said:

Aide, can you read out the full adaptive maps or are there any plans to add this?

Hi Jabbah,
There are no plans to add this at present.
Aide

[astonman]

Hi Aide,
Just orderred leads before downloading App.
Please can you allow oil pressure to be seen,i have a speed six T350.
Regards
Simon.

[Twinkam]

astonman said:

Hi Aide,
Just orderred leads before downloading App.
Please can you allow oil pressure to be seen,i have a speed six T350.
Regards
Simon.

I'm prepared to be corrected, but I don't believe that the ECU gets an oil pressure input.

[EvoOlli]

On the T-Cars the MBE ECU gets the oil pressure input, so it's accesable. You can see it in my Software :-) Shouldn't be a problem for Aide to add it.

[Twinkam]

Corrected I stand!
But then I only have an old Cerb...

[aide]

RS-AJP has the capability to read oil pressure. It always has.

I've responded to this request before, however I have to admit, this thread has become quite long and people can easily be forgiven if they don't have time to assimilate all the information that's spread across the whole thread!

I built the original version of the software using an ecu from a 2001 Tuscan. I then subsequently honed and tested everything on an ecu from a 4.2 Cerbera and finially in my car - a 4.5 Cerbera.

All the information that the app displays and logs is common to all ecu variants. It's like this to avoid confusion.

And Oil pressure is not enabled on the final version simply because I wrote RS-AJP for my car.

It's also not there because I'm sure a non functioning oil pressure dial would be the first thing V8 owners (myself included!) would complain about.

I also omitted it because it's already available, in very accurate real time, as a digital readout on the later speed six cars and as a dial on the speed six Cerberas.

The best thing I can think of would be to have an AJP6/AJP8 menu option. But is it really necessary?

Aide

[lake]

Hi Aide/all,

I have a couple of questions as I want to get this app up and running for my cerb 4.5.

1) Does anyone know if the galaxy s6 is compatible?

2) I have an s6 and a old school galaxy tab note 10.1, if I want to run the app on both of these devices do I need to purchase the app twice or can the license be shared between the devices?

Thanks

Lake

[CerbWill]

Well it works on an S7 Edge (maybe not the most helpful answer).
As long as your S6 and Tab are on the same Google account it'll work on both with one purchase.

[lake]

CerbWill, many thanks for the info.

[geeeman]

hi all

i have samsung s3, with the 2 cables attached..
no response

my ecu seems to also have a 2 pin cable, which u can see in pic (bottom left corner)

any suggestions?

[aide]

All looks ok connection wise
Do you have the suggested cables?