330mm front discs group buy?

[Vee8ight]

Brummmie said:

Still around 4 weeks to go, we got shoved back as the numbers are low for mass production.
But there is plenty of them coming, send me a pm and I will put you in my 1st come file.

ETA they are grooved.

Cheers Paul

Edited by Brummmie on Tuesday 17th September 08:02

Any news? ( I have some calipers now )

[Brummmie]

Hi Guys,

These will be ready mid December, been a long wait this one, but those rear discs we have had done are brilliant, mine have not worn at all, even with the RC8 pads, and these are full GT spec compound, very aggressive.

[Brummmie]

Right, i am taking delivery Christmas Eve, i can send some out in the period between the refreshment periods if required!

[Vee8ight]

Brummmie said:

Right, i am taking delivery Christmas Eve, i can send some out in the period between the refreshment periods if required!

Woop woop, Xmas pressies for TreVoR

[RedSpike66]

Are they all spoken for ?
I'll have a pair... presume they will fit Sag caliper ?

[jamieduff1981]

Can I just confirm I am on the list Paul?

[Brummmie]

RedSpike66 said:

Are they all spoken for ?
I'll have a pair... presume they will fit Sag caliper ?

Yes, they fit ALL 5 stud TVR from Cerbera onwards, so Sag/T350/Tam/Tuscan etc.
I have quite a few sets available, so more than enough to go around.
They will fit the earlier 6 bolt Cerbera caliper, and the later CP6600 that is fitted to later Cerbs, and T chassis cars, AP recommend up to 330mm so why not!?

[clive f]

any news yet then Paul??

[Brummmie]

clive f said:

any news yet then Paul??

Yes, discs landing Xmas eve.

[clive f]

OOh! are you being Santa then!!

[Brummmie]

I suppose i could put some cotton wool around the Cerberas mouth?

[Skellz]

great! another pressy for my cerby

[Vee8ight]

What about spacers?

[Brummmie]

Vee8ight said:

What about spacers?

Spacers are a seperate operation, but straightforward, i will get on that this week as i have an original spacer for the aquajet guys to copy, just needs to be 4mm.

[Vee8ight]

Brummmie said:

Vee8ight said:

What about spacers?

Spacers are a seperate operation, but straightforward, i will get on that this week as i have an original spacer for the aquajet guys to copy, just needs to be 4mm.

Are you doing this as a spacer to add to original spacer or as a one piece replacement spacer? I would like the latter please, as I'm upgrading from 296?mm disk not 322 like some

[Brummmie]

it seems there are 291 & 306mm variants, it will be a 4mm spacer for two different types of caliper, as i would have to do 6 spacers to do one piece parts. (3x spacers for two types of caliper)

[anonymous-user]

Hey Brummie, do you have a template for the one piece spacer for 330mm fronts? I've managed to lose both of mine whilst its been off the road and rebuilt. Cheers.

[Brummmie]

djstevec said:

Hey Brummie, do you have a template for the one piece spacer for 330mm fronts? I've managed to lose both of mine whilst its been off the road and rebuilt. Cheers.

I have an original, which is what i will use to get the CAD drawing done.

[anonymous-user]

Brummmie said:

djstevec said:

Hey Brummie, do you have a template for the one piece spacer for 330mm fronts? I've managed to lose both of mine whilst its been off the road and rebuilt. Cheers.

I have an original, which is what i will use to get the CAD drawing done.

Cool beans....can you make a couple for me too?

[RedSpike66]

Brummmie said:

RedSpike66 said:

Are they all spoken for ?
I'll have a pair... presume they will fit Sag caliper ?

Yes, they fit ALL 5 stud TVR from Cerbera onwards, so Sag/T350/Tam/Tuscan etc.
I have quite a few sets available, so more than enough to go around.
They will fit the earlier 6 bolt Cerbera caliper, and the later CP6600 that is fitted to later Cerbs, and T chassis cars, AP recommend up to 330mm so why not!?

So if you can put me down for a pair of discs and appropriate spacers please :-)
Xmas is coming early (well not really as last post will have long gone !!)