Cerbera window regulator..
Discussion
No one replaced a window motor/regulator..?
Jhonno said:
Bit of an update..
ECU was dead. Went to Paul @PSElectrical and it now works.. Passenger's side is sorted. Driver's window is dead. Can you repair the regulators? Got mine out/apart..
Looks like some wear on the carbon brushes etc..
ECU was dead. Went to Paul @PSElectrical and it now works.. Passenger's side is sorted. Driver's window is dead. Can you repair the regulators? Got mine out/apart..
Looks like some wear on the carbon brushes etc..
Sorry can't help with sourcing another motor but have you tried cleaning the commutator? Might be worth using a fine blade and cleaning out between the segments in case they are full of carbon from the brushes?
The commutator looks to have some wear (had to magnify 500% to see it!). With care and using some fine emery might be able to reduce the wear grooves a little.
The commutator looks to have some wear (had to magnify 500% to see it!). With care and using some fine emery might be able to reduce the wear grooves a little.
Edited by N7GTX on Thursday 29th May 16:26
sonnylad said:
Hi, check on the back for part number, one should be 0 130 821 069 and other side ends either 068 or 070
If 070 there is one here ( Ebay item 161318870557 ) but even so you should be able to get one good working motor out of the parts.
If not try Adrian Venn as he used to stock them.
Missed your post till yesterday.. If 070 there is one here ( Ebay item 161318870557 ) but even so you should be able to get one good working motor out of the parts.
If not try Adrian Venn as he used to stock them.
Adrian doesn't have one.
Need to check part numbers on mine.
Must be someone who refurbishes them! Would quite like to get it sorted now..
Gassing Station | Cerbera | Top of Page | What's New | My Stuff