What have you done to your car today......
Discussion
Got the door card off (nearly) as the last bolt holding it in was sighted by satan!
so pried it looking for my door close magnet thats gone AWOL and didn't do too much digging but cant find it yet.
I did investigate damage and there is a slight cracking on the sill inner.
Best bit was the marking on the door was definitely all on the vinyl wrap so cut part out for now just so i could smile a bit more.
[url]
|http://thumbsnap.com/N2S9mKzj[/url]
So I've left the rest on till it gets to Topcats Racing at the Weekend for my "other bits" to get done
so pried it looking for my door close magnet thats gone AWOL and didn't do too much digging but cant find it yet.
I did investigate damage and there is a slight cracking on the sill inner.
Best bit was the marking on the door was definitely all on the vinyl wrap so cut part out for now just so i could smile a bit more.
[url]
|http://thumbsnap.com/N2S9mKzj[/url]
So I've left the rest on till it gets to Topcats Racing at the Weekend for my "other bits" to get done
Dropped the car down to Top Cats for bits to be done... while there Wassa kindly got my plug cover off for me to wrap. The original paint had been looking shabby. So I decided on a black Carbon wrap with some Chrome SS lettering I had made up for me a while back.
Car could be ready for next weekend with all its added features.
Edited to add Massive thanks to ksv Colin for the lift home.
Car could be ready for next weekend with all its added features.
Edited to add Massive thanks to ksv Colin for the lift home.
Incognegro said:
Got the door card off (nearly) as the last bolt holding it in was sighted by satan!
so pried it looking for my door close magnet thats gone AWOL and didn't do too much digging but cant find it yet.
I did investigate damage and there is a slight cracking on the sill inner.
Best bit was the marking on the door was definitely all on the vinyl wrap so cut part out for now just so i could smile a bit more.
[url]
|http://thumbsnap.com/N2S9mKzj[/url]
So I've left the rest on till it gets to Topcats Racing at the Weekend for my "other bits" to get done
Nice to meet you and the guys at the shop for the first time. Hope the door works out ok....!so pried it looking for my door close magnet thats gone AWOL and didn't do too much digging but cant find it yet.
I did investigate damage and there is a slight cracking on the sill inner.
Best bit was the marking on the door was definitely all on the vinyl wrap so cut part out for now just so i could smile a bit more.
[url]
|http://thumbsnap.com/N2S9mKzj[/url]
So I've left the rest on till it gets to Topcats Racing at the Weekend for my "other bits" to get done
Today I was down at Topcats for the Sunday service so I got to see how the work is getting on.
Door sensor now fixed (so the window goes up at least... now just the fibreglass repair and paint to go).
Drilled rear discs fitted
Rear 595 RS-Rs fitted Warren says the mix with the T1 Rs shouldn't be an issue.
New design of scuttle clips fitted to both sides. Very secure and no movement.
My interior super bright LEDs now fitted and the "Silver Key" has now been replaced with a latching button. However the Cerbera wiring does not like it to power the halo LED on it so that is not doesn't come on.
Now its just sort the home garage ready for her return next week.
Oh yeah and shouldn't have forgotten my warning buzzer now fitted to let me know if Ive left the headlights on when the engine has been turned off.
Door sensor now fixed (so the window goes up at least... now just the fibreglass repair and paint to go).
Drilled rear discs fitted
Rear 595 RS-Rs fitted Warren says the mix with the T1 Rs shouldn't be an issue.
New design of scuttle clips fitted to both sides. Very secure and no movement.
My interior super bright LEDs now fitted and the "Silver Key" has now been replaced with a latching button. However the Cerbera wiring does not like it to power the halo LED on it so that is not doesn't come on.
Now its just sort the home garage ready for her return next week.
Oh yeah and shouldn't have forgotten my warning buzzer now fitted to let me know if Ive left the headlights on when the engine has been turned off.
Edited by Incognegro on Sunday 28th August 14:47
Edited by Incognegro on Tuesday 30th August 18:20
Just in at TC today coming on nicely.
The "Silver Key BUTTON" will now have a ring LED light. There had been a misunderstanding of my requirements so all good.
Oil leak now diagnosed an easy fix (when the engine is out) so Dom wants to hurry up and release the 4.7 so I can have it sorted lol
The "Silver Key BUTTON" will now have a ring LED light. There had been a misunderstanding of my requirements so all good.
Oil leak now diagnosed an easy fix (when the engine is out) so Dom wants to hurry up and release the 4.7 so I can have it sorted lol
Wanted my extinguisher readily to hand (no use in the boot or behind the seat) but didn't want to drill any extra holes in the floor. Piece of 3mm chequer-plate, cropped to size of foot-well, bottle cage screwed to it. Voila.
Was going to cover it with carpet, but I quite like it the way it looks, for now anyway, until it ruins my Laboutins...
OK, how do I get the photo to display rather than just the link?
Edited by Twinkam on Friday 2nd September 11:58
Coming from a rallying point-of-view, a fire extinguisher is not so much to save the car, but oneself... to buy exit time, to cool the zone; I want it where I can grab it whilst seated (God forbid, trapped) AND also readily accessible if I'm outside the car, but didn't want to run to a plumbed-in system. It doesn't impede exit.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff