Cerbera Steering Wheel Badge

Cerbera Steering Wheel Badge

Author
Discussion

BarnFind

Original Poster:

492 posts

146 months

Tuesday 29th July 2014
quotequote all
I wonder can someone help.i need to know what size the badge is i the steering wheel,also how is it attached.i have a wheel with no badge.thanks

Ireland

3,516 posts

214 months

Tuesday 29th July 2014
quotequote all
On mine it's 52mm in diameter

It's a black sticker with a silver TVR logo on it

It's basically a sticker with a resin bubble on top of it

It's just stuck on in place over the hole where you put the socket in our loosen / tighten the nut that holds the hub in place


BarnFind

Original Poster:

492 posts

146 months

Tuesday 29th July 2014
quotequote all
Thanks ,is it stuck to a disc or does it just sit there on its own.would you say its the same as a wheel sticker

MoonMonkey

119 posts

127 months

Tuesday 29th July 2014
quotequote all
Hi you can buy the steering wheel centre from Racing Green. Not cheap thoughcry

http://www.thetvrshop.com/TVR/Parts/Cerbera%20V8/a...

BarnFind

Original Poster:

492 posts

146 months

Wednesday 30th July 2014
quotequote all
MoonMonkey said:
Hi you can buy the steering wheel centre from Racing Green. Not cheap thoughcry

http://www.thetvrshop.com/TVR/Parts/Cerbera%20V8/a...
Thanks,silly me only bought some wheel stickers off them yesterday !

Ireland

3,516 posts

214 months

Wednesday 30th July 2014
quotequote all
The outer edge of it sticks to the steering wheel and it just sits there over the hole

In theory it's a fairly sh!t design but having said that mine is there for the last 17 years, has been on and off a few times and is still in place so it can't be all bad

smile

mike_e

585 posts

263 months

Wednesday 30th July 2014
quotequote all
A friend of mine used to manufacture these badges for TVR. I'm pretty certain I've got a sheet of these kicking around somewhere, I'll have a look when I get home.

Byker28i

59,770 posts

217 months

Wednesday 30th July 2014
quotequote all
I've not looked but my steering wheel is a little loose. How do you get to the nut? I was assuming I had to remove the little alan bolts. Do I just peal back the sticker?

BarnFind

Original Poster:

492 posts

146 months

Wednesday 30th July 2014
quotequote all
mike_e said:
A friend of mine used to manufacture these badges for TVR. I'm pretty certain I've got a sheet of these kicking around somewhere, I'll have a look when I get home.
many thanks,piece of TVR Memoriabilia on route if you do !

BarnFind

Original Poster:

492 posts

146 months

Wednesday 30th July 2014
quotequote all
Thanks for ll the replys

pmessling

2,284 posts

203 months

Wednesday 30th July 2014
quotequote all
i had some union jack ones made up which i think look really good


BarnFind

Original Poster:

492 posts

146 months

Friday 15th August 2014
quotequote all
Thanks Mike,received them yesterday,hope the bit of TVR Memoriabilia might be worth something someday,the stickers will finish off my Cerbera Steering wheel conversion in the Chimaera.

mike_e

585 posts

263 months

Friday 15th August 2014
quotequote all
Glad they got there safe and sound.