No prize but where's this part from :-)
Discussion
If i remember I'll measure my spare to confirm the size.
Alternatively if you can find the size get some to weld an m12 nut onto the adjuster plate and use a standard bolt. Would mean you'll have to drill out the plate to 12.5 clearance but would work as an alternative.
Or weld the hold up and drill it to something easily available like the 1.5
Alternatively if you can find the size get some to weld an m12 nut onto the adjuster plate and use a standard bolt. Would mean you'll have to drill out the plate to 12.5 clearance but would work as an alternative.
Or weld the hold up and drill it to something easily available like the 1.5
Had it confirmed as a m12 1mm pitch, have searched everywhere (including TVR Parts ) with no success.
I have asked a local company if they could make me one, it will be over £50 +vat though.
I don't really want to modify the existing setup, I can see why they used a 1mm pitch to get a fine adjustment.
So before I go and get one made, anyone know where I could get one ?
I have asked a local company if they could make me one, it will be over £50 +vat though.
I don't really want to modify the existing setup, I can see why they used a 1mm pitch to get a fine adjustment.
So before I go and get one made, anyone know where I could get one ?
Had it confirmed as a m12 1mm pitch, have searched everywhere (including TVR Parts ) with no success.
I have asked a local company if they could make me one, it will be over £50 +vat though.
I don't really want to modify the existing setup, I can see why they used a 1mm pitch to get a fine adjustment.
So before I go and get one made, anyone know where I could get one ?
I have asked a local company if they could make me one, it will be over £50 +vat though.
I don't really want to modify the existing setup, I can see why they used a 1mm pitch to get a fine adjustment.
So before I go and get one made, anyone know where I could get one ?
Likewise, I've just been searching for an M12 x 1.0 grub screw for my rack, to no avail. In fact the only things with that thread seem to be banjo bolts and bleed screws.
Then I remembered this thread (OUCH...sorry) from last summer...search and Bingo! and big thanks to Rufus.
The reason those don't come up in a search is that the seller doesn't seem to know the convention for describing an M12 x 1.0 screw, instead listing them as 12mm ....1mm pitch.
It does make you wonder what else is out there under wrong/misspelt headings... 'Cerbrea' anyone? or perhaps a 'TVR 4.2' ?
I'll be buying these screws and also a quantity of M12 x 1.0 half-nuts, so I'll have plenty to spare if anyone else needs them.
Then I remembered this thread (OUCH...sorry) from last summer...search and Bingo! and big thanks to Rufus.
The reason those don't come up in a search is that the seller doesn't seem to know the convention for describing an M12 x 1.0 screw, instead listing them as 12mm ....1mm pitch.
It does make you wonder what else is out there under wrong/misspelt headings... 'Cerbrea' anyone? or perhaps a 'TVR 4.2' ?
I'll be buying these screws and also a quantity of M12 x 1.0 half-nuts, so I'll have plenty to spare if anyone else needs them.
.
Is it car sized? 
Gassing Station | Cerbera | Top of Page | What's New | My Stuff