Equivalent Part Numbers

[Olly]

THE BIG DOG said:

Throttle linkage ball joints
www.ondrives.com
RAS5
RAS5L

Link

I'll update the spreadsheet tomorrow

Edited by Olly on Friday 10th August 18:36

[brogenville]

Fuel Tank Breather Valve / Roll-Over Valve:

Ford Part No.
91 AB-9A 153-AA BZ 02 A

Priced at £22 + VAT

Part no. taken from my 96 4.2.


(common fault if you're experiencing hot stalling- you can tell if your valve is faulty by checking to see if there is a build-up of of pressure in your fuel tank after driving- see "blowing and sucking" thread)

Edited by brogenville on Friday 17th August 14:30

Edited by brogenville on Friday 24th August 09:21

[Ireland]

Here's a link to a company doing replacement Catalytic converters

www.bmcatalysts.co.uk

I don't know anything about the company, other than the fact they have them listed.

[julian64]

Lost the cap that goes on the washer fluid. Anyone know of a replacement?

[Demondad]

Anyone know what the bootlid switch is from? The black thing in the LHS bootlid gutter. Mine has rusted very intermittent. Also the diff bushes?

[seanie248]

Can confirm with 100% certainty that the Hand Brake shoes are from a Peugeot 605 91-98 All Models
Order the full kit as most likely, the springs and clips will be rusted to f*$k
Fitting them to my Speed six at the mo.

Should hopefully have a part number on track rod ENDS in the next few days.

Also, having my Radiator re-cored, guy reckons its a Rover Rad, but cant place it exactly

Seanie

[Gazzab]

seanie248 said:

Can confirm with 100% certainty that the Hand Brake shoes are from a Peugeot 605 91-98 All Models
Order the full kit as most likely, the springs and clips will be rusted to f*$k
Fitting them to my Speed six at the mo.

Should hopefully have a part number on track rod ENDS in the next few days.

Also, having my Radiator re-cored, guy reckons its a Rover Rad, but cant place it exactly

Seanie

It is a modified Range Rover rad.

[copilot]

Gazzab said:

seanie248 said:

Can confirm with 100% certainty that the Hand Brake shoes are from a Peugeot 605 91-98 All Models
Order the full kit as most likely, the springs and clips will be rusted to f*$k
Fitting them to my Speed six at the mo.

Should hopefully have a part number on track rod ENDS in the next few days.

Also, having my Radiator re-cored, guy reckons its a Rover Rad, but cant place it exactly

Seanie

It is a modified Range Rover rad.

I agree, Range Rover core

[Nefarious]

I've been told by a friend that the mirrors are modified VW Corrado items, and that the hubs are off an Audi A6 (which probably means they're shared with other parts of the VW parts bin). Only second hand information, so I can't confirm.

I know the side repeaters are Fiesta items, but does anyone know what the main indicators are from?

[edhorne]

The indicators are as fitted to a Challenger tank (I kid you not!!) aswell as other military vehicles such as the humble landrover. Sometimes crop up on eBay.

Cheers

Ed

[Carlos29]

Sorry if it's already been mentioned , but this is one huge post to search through.

I have , err, 'lost' the oil filler cap from my 4.5 ajp v8.
You know, the one your supposed to replace after topping up your engine oil and racing off into the autumn sunshine on a Sunday afternoon.

Any assistance would be appreciated guys , thanks

[blueflash]

Leven do a nice fancy one Carl, though it's not cheep.

[Manfred]

anyone know where the aircon hoses are from?

[john grif]

Expansion tank and cap Audi 80. about 17 quid from europarts.
Altenator is land rover, pulley needs changing to the
tvr fitment. Couldn't find any local motor factors to supply
the short drive belt tho.

[optimax sniffer]

Anyone know where I can get the ball air vent that fits between the guages? Or where it comes from originally?

[Nefarious]

I don't know, by the ball vent looks suspiciously like the ones used in Rover Minis.

[volospian]

Anybody know where the diff bushes come from?

[THE BIG DOG]

Hand brake shoes are from a Pug 605
Ferodo part - Part number is FSB425

[V8Cerbera]

What is an equivalent bit for the big bracket that the front of the slip diff bolts to? Mine has snapped and hence the LSD is about 8mm displaced, causing the OSR drive shaft bolts to rub on the suspension A-Frame (hence undriveable at this point)....

[Ireland]

Manfred said:

anyone know where the aircon hoses are from?

I think they are made for the Cerb.

Most places that make up hydraulic hoses also make up air-con hoses.

If you bring the old ones along to them they should be able to copy them for you easily enough.