Equivalent Part Numbers

Equivalent Part Numbers

Author
Discussion

M3John

5,974 posts

218 months

Wednesday 25th November 2009
quotequote all
Lots of useful information on here guys. Have just read all the pages back - to - back !

Wanted to ask though, does anybody know where the headlight adjusters are from for the `pod type lights` (see profile picture for exact type i mean) as i had a breif look at mine the other week and they are pretty buggered.

Cheers.



Edit;

Are these the ones? ....

http://www.tvrspareparts.com/part/327/headlamp-adj...


Edited by M3John on Wednesday 25th November 13:38

Ireland

3,516 posts

213 months

Friday 27th November 2009
quotequote all
Here's a link to the thread I started about making and fitting a new under-car spoiler (the one that helps stop the bonnet rattling).

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

It's an easy enough job and costs very little.

Jackal83

178 posts

173 months

Friday 4th December 2009
quotequote all
TooTall Paul said:
Front upper ball joints

Saab
99 74-84
90 84-85
900 79

Veco ball joints, part no VBO26
Needs updating on the website... the website misses the 6 in the Part number.

CER927

178 posts

215 months

Friday 4th December 2009
quotequote all
Any one know what car the wiper motor gear box is off, as my motor is broken and it has melted/stripped the teeth off the nylon wheel within. The list states a mini motor to which you fit your old gearbox. I would if I could!

Ireland

3,516 posts

213 months

Friday 4th December 2009
quotequote all
CER927 said:
Any one know what car the wiper motor gear box is off, as my motor is broken and it has melted/stripped the teeth off the nylon wheel within. The list states a mini motor to which you fit your old gearbox. I would if I could!
Post it in the normal bit of the forum.

You'll be waiting for a reply in here.

We only look in here when we want something and post when we found something.

DanTVR

281 posts

183 months

Thursday 28th January 2010
quotequote all
The main link isn't working again, the alexjudd.co... one works but it doesn't have all of the info on it. Can anyone help?

Cheers,
Dan

itiejim

1,821 posts

204 months

Wednesday 3rd February 2010
quotequote all
4.5 throttle pots - Sierra, Granada or Transit 2.0 DOHC pre 1999.

Ford part number 88WF 9B989 CA


Edited by itiejim on Wednesday 3rd February 17:23

davidd

6,443 posts

283 months

Sunday 14th February 2010
quotequote all
Expansion tank, euro carparts 205440130 please note there is no cap..

D

skidoo

400 posts

189 months

Tuesday 23rd February 2010
quotequote all
seat belt extensions are for a vauxhall tigra or calibra
part numbers for all 3 bits are
90046083 pulley guide £7.85
90046084 pulley head-guide £2.00
90046085 insert-guide pulley £2.14
thumbup

Jimii

182 posts

176 months

Friday 12th March 2010
quotequote all
blue top throttle pot intermotor part number 19922 also the gfs part number on the coil packs does not work anymore but the euro part number is still good. Got another part number that might be right for the map sensor gonna go have a look at one to compare, intermotor part number 16800 http://partfinder.smpeurope.com/index.html?p=156&a...

Edited by Jimii on Friday 12th March 19:40

Jimii

182 posts

176 months

Monday 15th March 2010
quotequote all
just to confirm the throttle pot and map sensor number are correct i have them fitted smile

Killer Rhubarb

388 posts

177 months

Sunday 28th March 2010
quotequote all
Ireland said:
Here's a link to a company doing replacement Catalytic converters

www.bmcatalysts.co.uk

I don't know anything about the company, other than the fact they have them listed.
They are avail from eurocarparts at a very good price. they do ceramic and steel versions of the cat for when you need an MOT

Gazzab

21,061 posts

281 months

Saturday 17th April 2010
quotequote all
For a post 2002 Cerb with the angled rear plate I THINK that I have found a cheaper supplier of the number plate light fittings:
https://www.btowstore.com/epages/BT2955.sf/sec2zJ4...

I have ordered a couple. TVR parts shops want over £20 (nearly £25) for 2 including expensive postage. £11 all in for 2 from caravan place.

Gazzab

21,061 posts

281 months

Tuesday 20th April 2010
quotequote all
Top Balljoint is a Saab 99/900:

Upper Front ball joint Saab 99/900 Elkparts 0870 750 1428 www.elkparts.com £11.37 ea

or, £38.25 ea from Racing Green: http://www.thetvrshop.com/ProductsDetail.asp?PartN...

Or, Racetech TVR @ £19.95



mikethebike1127

170 posts

170 months

Saturday 5th June 2010
quotequote all
2 wire boot lock actuator. Ordered yesterday afternoon and it was on my doorstep this morning.

£46 + Vat in certain shops.......£16 from these guys and it's MES!!! Nuff sed!!!

http://abacuscaralarms.co.uk/alarmshop/index.php?a...

Juddder

835 posts

183 months

Wednesday 21st July 2010
quotequote all
DanTVR said:
The main link isn't working again, the alexjudd.co... one works but it doesn't have all of the info on it. Can anyone help?

Cheers,
Dan
Hi Dan

Of course we can help :-)

Please find (and for everyone else) a complete updated list of all Alternative Parts with a nice new design (handy owning a design company) and shortcuts to all the links.

http://www.alexjudd.com/cerbera/parts/

Hope this helps!

Alex

mattrosersv

579 posts

229 months

Friday 30th July 2010
quotequote all
CER977 regarding Wiper Motors.

Mine recently burnt out and I picked up a mini wiper motor from the scrappy out of interest, having read lots of threads on here about it. I could not find any posts from anyone who had actualy done the mini wiper motor swap.

I did not even bother opening it up when I compared it as the gearbox cover was smaller than TVR although looks similar. The motor was about the right size, but this did not seem to fit either (- to be honest I gave up on this pretty quickly). If you want to check for sure you can have my mini motor if you are local to me (Andover).

Best bet is Adrian Ven (google him). He refurbs these.

Adrian Venn. Tel/fax 024 7659 6883 or mobile 0795 695 6042.


Ireland

3,516 posts

213 months

Saturday 31st July 2010
quotequote all
Here's a link to a thread I started on how to fit new rear shocks

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

ridds

8,191 posts

243 months

Saturday 31st July 2010
quotequote all
Juddder said:
DanTVR said:
The main link isn't working again, the alexjudd.co... one works but it doesn't have all of the info on it. Can anyone help?

Cheers,
Dan
Hi Dan

Of course we can help :-)

Please find (and for everyone else) a complete updated list of all Alternative Parts with a nice new design (handy owning a design company) and shortcuts to all the links.

http://www.alexjudd.com/cerbera/parts/

Hope this helps!

Alex
Oooo very nice, I'd been meaning to put all the info in an an excel sheet so it was easy to search but that's perfect. You'll have to keep it updated now. laugh even after you get rid of your Cerb! wink

Juddder

835 posts

183 months

Tuesday 3rd August 2010
quotequote all
ridds said:
Oooo very nice, I'd been meaning to put all the info in an an excel sheet so it was easy to search but that's perfect. You'll have to keep it updated now. laugh even after you get rid of your Cerb! wink
smile My and my big fingers! Well the good news is the Cerb is probably staying indefinitely (I seem to have a knack of holding on to these things) so I'm happy to keep it up to date when I get a sec or two tongue out