Before & After - exhaust fiddling
Discussion
Right - the story. When I bought my cerb, a previous owner decided that it would be a good idea to cut off the ends of the stainless steel sports exhaust and screw on twin chromed mild steel trims .
These not only rusted but did not fit cut-outs, made it neccessary to have the exhaust hanging on the floor so it did not hit the bodywork and hence caught on everything else
A few weeks ago after much searching I found these trims and they are now bolted on with sleeves, so that if I want to track-day, they can be slid off and mufflers bolted in their place. They are large enough to fit your hand and a spanner inside to do up bolts !!! & are virtually the same size as the cut out in the boot floor. Whilst I would not suggest chopping off the original pipes, in my case I had no choice so I am quite chuffed with the result. Comments welcomed (I hope).
These not only rusted but did not fit cut-outs, made it neccessary to have the exhaust hanging on the floor so it did not hit the bodywork and hence caught on everything else
A few weeks ago after much searching I found these trims and they are now bolted on with sleeves, so that if I want to track-day, they can be slid off and mufflers bolted in their place. They are large enough to fit your hand and a spanner inside to do up bolts !!! & are virtually the same size as the cut out in the boot floor. Whilst I would not suggest chopping off the original pipes, in my case I had no choice so I am quite chuffed with the result. Comments welcomed (I hope).
They look very nice Jerry... Might find a few follow your lead!
Go create some weather...
Graham
TCR The Cerbera Register
www.TVR-Cerbera.com
Go create some weather...
Graham
TCR The Cerbera Register
www.TVR-Cerbera.com
Has anybody else on here done anything interesting with their exhausts? I'm currently planning on having some Tuscan style cans on the back in a few weeks, but am open to alternative ideas.
Cheers,
-JS
[Edit: suffolkfox... yours are looking good, by the way]
>> Edited by j_s_g on Tuesday 22 July 17:23
Cheers,
-JS
[Edit: suffolkfox... yours are looking good, by the way]
>> Edited by j_s_g on Tuesday 22 July 17:23
Did the same to mine in polished stainles whilst off decided to polish underneath pipes and boxes as well. Am i Mmmmmmmmm. My wifey tinks so?.
[pic]www.fotango.com/p/eba00346938f00000003.jpg
Oh and had sports cans fitted as well rear outlets are 75mm sounds like a firework display coming down the road.
>> Edited by bbt11 on Tuesday 22 July 21:35
[pic]www.fotango.com/p/eba00346938f00000003.jpg
Oh and had sports cans fitted as well rear outlets are 75mm sounds like a firework display coming down the road.
>> Edited by bbt11 on Tuesday 22 July 21:35
Gassing Station | Cerbera | Top of Page | What's New | My Stuff