Aircon Light

[rappa]

I've come back to the car after two days away and the blue Aircon light which used to shine brightly now dosen't when I press the button, I can't work out wheather it's on or off. Anyone outthere able to help?

[crazycats]

The light on mine has always been really dim, and like you say its a pain in the arse to see. I did take the panel out to see if it could be changed, but its soldered onto the board....so put it straight back again!!!!!!

[GCerbera]

Mine has always been hard to see.

Go create some weather...
Graham
TCR The Cerbera Register

www.TVR-Cerbera.com

[kojak69]

Mines always been dim and I struggle to see if its on.
As crazycats mentioned, its not a straightforward bulb.
Markys also found out yesterday, as hes having the same problems regarding his MIL light.

[mudstud]

Ditto, hard to see except unless its dark.

[jamster]

Mine shines brightly when it's OFF and brightly when it's ON. Same with the heater.Since the air con takes a wee while to come through, watch the rev limiter dip or rise when you switch it on and off.

Jamster

[matt101]

Mine was the same and could hardly see if it was on or off in daylight.
Its very easy to solder in a new LED and takes about 10 mins to do. Replacement LEDs can be purchased from places like Maplin and RS for a quid or so.

[crazycats]

matt101 said:

Its very easy to solder in a new LED and takes about 10 mins to do.

If I send you mine then will you do it? Cos touching PCB's frightens the S**T out of me !!!

[matt101]

I can do Crazycats but your running more of a risk of damage in the post than having a go yourself!!

If you would like me to do this for you, drop me an e mail via my profile.

Cheers,

Matt.

[rappa]

Thanks guys, been away on holiday, but advice taken, alot of the ones I test drove were very dim but this one was allways bright( oo er )

Sean