Need help with my Ford XR3
Discussion
Good day gents
I recently bought a ford xr3 and the problem im having is when I start up in the morning I struggle to get her started I have to continue pumping on the gas pedal and turning the ignition on and off, once she starts up she misses until she becomes warm and then idle settles to 1000rpm and then after there is no problems with starting and the miss. what I would like to know is what is causing this problem with starting in the morning.
if someone could help me out I highly appreciate it thank you
I recently bought a ford xr3 and the problem im having is when I start up in the morning I struggle to get her started I have to continue pumping on the gas pedal and turning the ignition on and off, once she starts up she misses until she becomes warm and then idle settles to 1000rpm and then after there is no problems with starting and the miss. what I would like to know is what is causing this problem with starting in the morning.
if someone could help me out I highly appreciate it thank you
It sounds like you have very limited knowledge to be tampering.
But a good start for an old vehicle might be a Haynes manual. They're crap for modern stuff, but for an older vehicle there should still be some useful information in there about inspecting the various parts/operation of things like the choke.
But a good start for an old vehicle might be a Haynes manual. They're crap for modern stuff, but for an older vehicle there should still be some useful information in there about inspecting the various parts/operation of things like the choke.
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff