Machining individual liners - recommendations

[227bhp]

There is way to much info missing from your initial post, why don't you put the full story in there instead of playing forum games? It's like playing hangman or fecking Cluedo.
Who damaged the liners?
If you reface them they will be shorter, is it not the case that they will then not fit?

[Boosted LS1]

e8_pack said:

I called rob, he asked me what the problem was, I said darton and he cut me off and said he couldn't do it. Didn't even discuss what the problem was. He then asked what car and I said Porsche and he said he didn't work on Porsche! Yet his site lists Porsche work. Very odd. Went on to say how busy he was etc..

I'm not surprised, he said the same thing to me about being to busy. I'd questioned why he'd wanted to charge me 3 times the amount listed on his web site for balancing a v6 crankshaft and he got all befuddled despite having done one for me last year. I took it elsewhere.

[Boosted LS1]

If you know how much you want removing then I'm sure any precision engineering firm could do it.

[e8_pack]

227bhp said:

There is way to much info missing from your initial post, why don't you put the full story in there instead of playing forum games? It's like playing hangman or fecking Cluedo.
Who damaged the liners?
If you reface them they will be shorter, is it not the case that they will then not fit?

Steady on old chap! I only asked for recommendations from a machine shop to carry out a task. To be honest it's just a last ditch effort to recover what had been a lost cause so far.

I got one, it didn't work out, so i feel all the better for trying.

I bought them from the states and after much grief have been unable to get a replacement.

Much to my disappointment and annoyance, I have now purchased replacements so I guess it's case closed.

Sorry to bother you all, as you were.

[99hjhm]

e8_pack said:

I called rob, he asked me what the problem was, I said darton and he cut me off and said he couldn't do it. Didn't even discuss what the problem was. He then asked what car and I said Porsche and he said he didn't work on Porsche! Yet his site lists Porsche work. Very odd. Went on to say how busy he was etc..

That sounds like Rob!! haha

Sadly he is very busy because he is very good and i think would wind back a little.

PumaRacing2 said:

Wot e said, lol. (just trying to find a username I can live with)

Whats with the new user name Puma?

[stevieturbo]

99hjhm said:

Whats with the new user name Puma?

Some muppet banned him for calling a spade a spade. Admin clearly dont like sense and truth being spoken in a technical forum.

[99hjhm]

stevieturbo said:

Some muppet banned him for calling a spade a spade. Admin clearly dont like sense and truth being spoken in a technical forum.

Sounds about right, ban the most knowledgeable and experienced member on a technical forum!

[CrutyRammers]

stevieturbo said:

99hjhm said:

Whats with the new user name Puma?

Some muppet banned him for calling a spade a spade. Admin clearly dont like sense and truth being spoken in a technical forum.

Wtf now? I know puma can be a bit harsh, but is also one of the most useful posters on the whole site.

[FordPrefect56]

Apparently knowledge and experience count for very little under the new regime here.

[Rally Ax]

Crazy,,,, this forum has one of the best, most informative and technical forums on the net! Makes for really good reading.

[stevieturbo]

FordPrefect56 said:

Apparently knowledge and experience count for very little under the new regime here.

Kim Jong Il would be proud !

[FordPrefect56]

Rally Ax said:

Crazy,,,, this forum has one of the best, most informative and technical forums on the net! Makes for really good reading.

Not for much longer it seems with people this petty running it.

[FordPrefect56]

stevieturbo said:

Kim Jong Il would be proud !

Isn't he kind of busy being dead? lol

[stevieturbo]

FordPrefect56 said:

Isn't he kind of busy being dead? lol

feck I dunno, who's the other one then ?