Monaro cluster modding
Discussion
the_ferret82 said:
It is possible without a new cluster but it does mean rewriting chunks of the eprom and I'm not that good, although I am working on finding out how to do it.
Really?? I thought the km symbols where all that was there. There a solid mark. Ill put mine in to test mode and check.
Although not on at all would be fine. Gets rid oh the crap cover tape.
Hmmmm this thread just got interesting.
Ill check but it does look like there is mph options from some online pics I have seen.
I take it you are on or have seen this site.
This is a vt thread but must be a VY/z thread. Quite active.
http://www.delcohacking.net/forums/viewtopic.php?f...
And here maybe.
http://www.carmodder.com/search_doc.php
Ill check but it does look like there is mph options from some online pics I have seen.
I take it you are on or have seen this site.
This is a vt thread but must be a VY/z thread. Quite active.
http://www.delcohacking.net/forums/viewtopic.php?f...
And here maybe.
http://www.carmodder.com/search_doc.php
Behold81 said:
the_ferret82 said:
This is possible a few guys in oz have done it and there is some write up on the net.
Can't find info on it. Just the actual dash. Then they use the old cluster. http://forums.justcommodores.com.au/vt-vx-holden-c...
Behold81 said:
Hmmmm this thread just got interesting.
Ill check but it does look like there is mph options from some online pics I have seen.
I take it you are on or have seen this site.
This is a vt thread but must be a VY/z thread. Quite active.
http://www.delcohacking.net/forums/viewtopic.php?f...
And here maybe.
http://www.carmodder.com/search_doc.php
im already a member of both sites Ill check but it does look like there is mph options from some online pics I have seen.
I take it you are on or have seen this site.
This is a vt thread but must be a VY/z thread. Quite active.
http://www.delcohacking.net/forums/viewtopic.php?f...
And here maybe.
http://www.carmodder.com/search_doc.php
the_ferret82 said:
That's new!!! Only a month old. TaChanging the PCM should be easy enough. Although will look at what the difference is. Surely I can flash a different OS to mine.
Behold81 said:
the_ferret82 said:
That's new!!! Only a month old. TaChanging the PCM should be easy enough. Although will look at what the difference is. Surely I can flash a different OS to mine.
SOCO said:
the_ferret82 said:
I forgot about you, your local ish lol
Tell me do you have the shift up light on the 05 cv8 by default?
Err... Do I have a red light come on and a frantic beeping noise when I hit the rev limiter?Tell me do you have the shift up light on the 05 cv8 by default?
If that's the question, then the answer is yes
EmmaJ said:
Can you fix misfires
We need all the help we can muster...!
ETA: Looking forward to seeing the finished article. Great work so far
oddly enough i can....... on a 1969 Mini... We need all the help we can muster...!
ETA: Looking forward to seeing the finished article. Great work so far
im also looking forward to seeing the finished article... before i go blind. it looks like the americans have found some new features i need to check out on our uk clusters as there not the same as the American one or Australian ones well not 100%
the_ferret82 said:
just a quick update to say my "Bench" cluster has turned up so i can now do things at a lot less risk
im hoping to make some good progress on this, this week.
Mate don't know if this helps....BUT..... it says "Check Engine"..... Think you will find somebody has nicked it...im hoping to make some good progress on this, this week.
Emma bring it back
IXLR8 said:
the_ferret82 said:
just a quick update to say my "Bench" cluster has turned up so i can now do things at a lot less risk
im hoping to make some good progress on this, this week.
Mate don't know if this helps....BUT..... it says "Check Engine"..... Think you will find somebody has nicked it...im hoping to make some good progress on this, this week.
Emma bring it back
another update for you all. here is a list of things i have managed to achieve since having a bench cluster setup.
VY Cars (Big Boot Models)
Holden Startup Logo
HSV Startup Logo
chevrolet Startup Logo
CSV Startup Logo
Pontiac Startup logo
and of course the Vauxhall startup logo.
for HSV and CSV startup logos only shutdown text can be added that can shows one of the following
Build Number
Car type eg Monaro / Coupe and year
HSV and year
custom text + year
Shift light enable / disable for all logos
changing the shift light low temp RPM
change shift light RPM for each gear from 0 rpm to 10,000 RPM
Change a manual Cluster into an auto cluster and visa versa
changing all dials and trip computer options to KPH and back again (not sure if i can change a default KPH to MPH yet)
turn off the service reminder permanently
adjust service reminder intervals
VY Cars (Small Boot Models)
Holden Startup Logo
HSV Startup Logo
chevrolet Startup Logo
CSV Startup Logo
Pontiac Startup logo
and of course the Vauxhall startup logo.
for HSV and CSV startup logos only shutdown text can be added that can shows one of the following
Build Number
Car type eg Monaro / Coupe and year
HSV and year
custom text + year
Shift light enable / disable for all logos
changing the shift light low temp RPM
change shift light RPM for each gear from 0 rpm to 10,000 RPM
turn off the service reminder permanently
adjust service reminder intervals
Generic,
reset all cluster DTC codes
Reset aribag light
things im currently working on
changing a VZ cluster from manual to auto and visa versa
enable the LCD display to show the gear you have changed to for both manual and auto
Airbag lights
i think there is some thing i have missed.
plus any requests for areas to look at / things to do?
VY Cars (Big Boot Models)
Holden Startup Logo
HSV Startup Logo
chevrolet Startup Logo
CSV Startup Logo
Pontiac Startup logo
and of course the Vauxhall startup logo.
for HSV and CSV startup logos only shutdown text can be added that can shows one of the following
Build Number
Car type eg Monaro / Coupe and year
HSV and year
custom text + year
Shift light enable / disable for all logos
changing the shift light low temp RPM
change shift light RPM for each gear from 0 rpm to 10,000 RPM
Change a manual Cluster into an auto cluster and visa versa
changing all dials and trip computer options to KPH and back again (not sure if i can change a default KPH to MPH yet)
turn off the service reminder permanently
adjust service reminder intervals
VY Cars (Small Boot Models)
Holden Startup Logo
HSV Startup Logo
chevrolet Startup Logo
CSV Startup Logo
Pontiac Startup logo
and of course the Vauxhall startup logo.
for HSV and CSV startup logos only shutdown text can be added that can shows one of the following
Build Number
Car type eg Monaro / Coupe and year
HSV and year
custom text + year
Shift light enable / disable for all logos
changing the shift light low temp RPM
change shift light RPM for each gear from 0 rpm to 10,000 RPM
turn off the service reminder permanently
adjust service reminder intervals
Generic,
reset all cluster DTC codes
Reset aribag light
things im currently working on
changing a VZ cluster from manual to auto and visa versa
enable the LCD display to show the gear you have changed to for both manual and auto
Airbag lights
i think there is some thing i have missed.
plus any requests for areas to look at / things to do?
Edited by the_ferret82 on Wednesday 24th April 23:40
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff