VXR8 VCM OTR owners...

[bradwil]

Anyone running a bigger throttle body?
Fast 102mm or the Nick Williams 102mm?
Just wondering if there is different rubber connector from the OTR to the TB or if i could use the original one.
Called Monkfish but they weren't sure and I have checked the VCM site and couldn't see it.

[ringram]

Totally pointless with that intake mate, The 90mm intake will flow way more than the VCM will!

[bradwil]

ringram said:

Totally pointless with that intake mate, The 90mm intake will flow way more than the VCM will!

What would you recommend with the Nick Williams?

[ringram]

If you are fast 102/102 then rotofab 102 is the best match. Email the guys to do a custom 102 intake.

But if you are still running stock heads, then thats also pointless and the VCM is probably fine..

No point removing one restriction and not the rest..

Get some TFS or AFR heads etc!

[bradwil]

ringram said:

If you are fast 102/102 then rotofab 102 is the best match. Email the guys to do a custom 102 intake.

But if you are still running stock heads, then thats also pointless and the VCM is probably fine..

No point removing one restriction and not the rest..

Get some TFS or AFR heads etc!

It's on the list...Where's the best place for the rotofab 102?

[jameshsv]

bradwil said:

It's on the list...Where's the best place for the rotofab 102?

I think snowy has one fitted

[ringram]

I bought mine direct.

Part way down you will see the 102mm model http://www.roto-fab.com/G8.html

Basically its about filter area. So any brand with a decent filter area should be ok.

Rotofab, just does a 102mm and large cone so..