Rolling Road Results
Discussion
psycho sport said:
Random question, after the rolling road session my gauges on the dash have decided to stop working! Only thing I can think of is Roger reset something or unplugged something before the run. Not sure if that would have done it? Any ideas?
These are the added twin gauges on top of the dash, not the normal cluster!
Ooops!. Might be my bad. Plug will be tucked out of the way of Charlies feet to the left and above the OBD port (below cover under the steering column in line with the column)These are the added twin gauges on top of the dash, not the normal cluster!
Tattoboy said:
I'm waiting to see what WP say/estimate what RWHP I'll get if I put a CAM. If R8black has 420 with a MF CAM, with my 388, assuming that's not crammed, I should get nearer
It'll have to be a mighty large cam to make 62bhp will it not, is that even possible from just a cam change
r8black said:
Tattoboy said:
I'm waiting to see what WP say/estimate what RWHP I'll get if I put a CAM. If R8black has 420 with a MF CAM, with my 388, assuming that's not crammed, I should get nearer
It'll have to be a mighty large cam to make 62bhp will it not, is that even possible from just a cam change
I know its a different engine but on the LS7 Katech are quoting over 120whp gains from one of their street cams, whether you get that much or not is irrelevant for the claim to stand it must be a huge increase all the same. Its not that big a cam either I'm waiting to see what WP say/estimate what RWHP I'll get if I put a CAM. If R8black has 420 with a MF CAM, with my 388, assuming that's not crammed, I should get nearer
It'll have to be a mighty large cam to make 62bhp will it not, is that even possible from just a cam change
r8black said:
Tattoboy said:
I'm waiting to see what WP say/estimate what RWHP I'll get if I put a CAM. If R8black has 420 with a MF CAM, with my 388, assuming that's not crammed, I should get nearer
It'll have to be a mighty large cam to make 62bhp will it not, is that even possible from just a cam change
Well, as a crude calc, I've just taken a low 15% increase on my RWHP figure, which in theory, should be achievable ?I'm waiting to see what WP say/estimate what RWHP I'll get if I put a CAM. If R8black has 420 with a MF CAM, with my 388, assuming that's not crammed, I should get nearer
It'll have to be a mighty large cam to make 62bhp will it not, is that even possible from just a cam change
Plus the WP CAMs are are a bit bigger
r8black said:
Tattoboy said:
I'm waiting to see what WP say/estimate what RWHP I'll get if I put a CAM. If R8black has 420 with a MF CAM, with my 388, assuming that's not crammed, I should get nearer
It'll have to be a mighty large cam to make 62bhp will it not, is that even possible from just a cam change
I am looking at another 40bhpI'm waiting to see what WP say/estimate what RWHP I'll get if I put a CAM. If R8black has 420 with a MF CAM, with my 388, assuming that's not crammed, I should get nearer
It'll have to be a mighty large cam to make 62bhp will it not, is that even possible from just a cam change
jameshsv said:
r8black said:
Tattoboy said:
I'm waiting to see what WP say/estimate what RWHP I'll get if I put a CAM. If R8black has 420 with a MF CAM, with my 388, assuming that's not crammed, I should get nearer
It'll have to be a mighty large cam to make 62bhp will it not, is that even possible from just a cam change
I am looking at another 40bhpI'm waiting to see what WP say/estimate what RWHP I'll get if I put a CAM. If R8black has 420 with a MF CAM, with my 388, assuming that's not crammed, I should get nearer
It'll have to be a mighty large cam to make 62bhp will it not, is that even possible from just a cam change
r8black said:
It'll have to be a mighty large cam to make 62bhp will it not, is that even possible from just a cam change
Not really LS3 has good heads and displacement anyway.Plenty of results out there with way more than 62, over 70 here from a 227 cam.
http://www.hotrod.com/techarticles/hrdp_1202_hp_ga...
With a good tune Id say Tattoo should get 450 depends on cam totally.
monkfish1 said:
psycho sport said:
Random question, after the rolling road session my gauges on the dash have decided to stop working! Only thing I can think of is Roger reset something or unplugged something before the run. Not sure if that would have done it? Any ideas?
These are the added twin gauges on top of the dash, not the normal cluster!
Ooops!. Might be my bad. Plug will be tucked out of the way of Charlies feet to the left and above the OBD port (below cover under the steering column in line with the column)These are the added twin gauges on top of the dash, not the normal cluster!
Edited by psycho sport on Monday 20th October 23:04
psycho sport said:
monkfish1 said:
psycho sport said:
Random question, after the rolling road session my gauges on the dash have decided to stop working! Only thing I can think of is Roger reset something or unplugged something before the run. Not sure if that would have done it? Any ideas?
These are the added twin gauges on top of the dash, not the normal cluster!
Ooops!. Might be my bad. Plug will be tucked out of the way of Charlies feet to the left and above the OBD port (below cover under the steering column in line with the column)These are the added twin gauges on top of the dash, not the normal cluster!
psycho sport said:
I ll have a look tomorrow! Thanks for the replies. Thanks Roger for plugging in and checking all is running well! I can foresee me spending some hard earned with you in the future!
been there done that, still doing it Edited by psycho sport on Monday 20th October 23:04
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff