Misfire... Thoughts?
Discussion
KMud said:
Seems logical...but I don't understand why the Magnecors come in LS1 only and LS2/LS3 flavours.
later coils mount slightly higher so might have a longer lead.And manifold shapes on some cars might vary very slightly, but I think most use a fairly straight boot anyway ?
Plus when buying, some people just like to see their specific model listed rather than a generic comment saying fits all cars.
Right, an update, and bear with me as it's a pretty poor show...!
So, got Ian's leads that he very kindly sent to me. As I have AAS headers, the leads for 5, 6 and 7 are MSD leads, as the stock ones foul the headers.
So I replaced the other 5. When I removed 3, the lead had come apart on the inside, so I assumed this was my culprit!
No such luck though, so next up, spark plugs.
Just did those, and the spark plug socket won't fit onto plug 7 because the header is in the way... Great. So I've now changed 7 of the plugs, so still nothing conclusive, and it's still there, and in fact is still getting worse.
I didn't have a feeler gauge to check the gap on the new plugs, so all in all not a very successful venture!
Is the best bet just to loosen the header to get to 7, or get a different socket that'll fit?
All the plugs looked absolutely fine that came out of the car, all the same colour and so on, here's a pic of some (the clean girly hands are my friend's not mine )
So, got Ian's leads that he very kindly sent to me. As I have AAS headers, the leads for 5, 6 and 7 are MSD leads, as the stock ones foul the headers.
So I replaced the other 5. When I removed 3, the lead had come apart on the inside, so I assumed this was my culprit!
No such luck though, so next up, spark plugs.
Just did those, and the spark plug socket won't fit onto plug 7 because the header is in the way... Great. So I've now changed 7 of the plugs, so still nothing conclusive, and it's still there, and in fact is still getting worse.
I didn't have a feeler gauge to check the gap on the new plugs, so all in all not a very successful venture!
Is the best bet just to loosen the header to get to 7, or get a different socket that'll fit?
All the plugs looked absolutely fine that came out of the car, all the same colour and so on, here's a pic of some (the clean girly hands are my friend's not mine )
Yep I know, it's been so frustrating not being able to do a complete job each time!
I am planning to relocate my coilpacks, so I have the MSD kit for making up new leads, but as they'll be longer etc I don't want to make them up now, hence trying some borrowed leads just in case!
Changed out plug 7 today, slackened the header, also took them all out to check the gap and it was as expected. Hilariously, whilst putting them all back in, the ceramic broke on plug 6 somehow, so I've had to put the old bloody plug back in so still haven't got my complete new set!
So frustrating. Will get another new plug for 6 do at least that is ruled out, then will get the leads sorted. Saving money on fuel at least!
I am planning to relocate my coilpacks, so I have the MSD kit for making up new leads, but as they'll be longer etc I don't want to make them up now, hence trying some borrowed leads just in case!
Changed out plug 7 today, slackened the header, also took them all out to check the gap and it was as expected. Hilariously, whilst putting them all back in, the ceramic broke on plug 6 somehow, so I've had to put the old bloody plug back in so still haven't got my complete new set!
So frustrating. Will get another new plug for 6 do at least that is ruled out, then will get the leads sorted. Saving money on fuel at least!
SturdyHSV said:
As it's always nice to get an update on these things, it was HT leads as suggested.
One of the MSD ones had been spoiled by a header, bit of a white mark etc. Anyway, chopped the end off it and it was a real mess in there.
Car is back running like it should do
A month to change the leads? 4 days per lead? One of the MSD ones had been spoiled by a header, bit of a white mark etc. Anyway, chopped the end off it and it was a real mess in there.
Car is back running like it should do
It's a long story, I'm planning on relocating the coilpacks, so I'd already bought a set of MSD 'make your own' jobbies to make up to length once I'd decided where the coilpacks were going to go.
So I didn't want to buy another set of leads when I had a set ready to be made up
In the end I gave up, decided roughly where they're going to go and just made the leads
So I didn't want to buy another set of leads when I had a set ready to be made up
In the end I gave up, decided roughly where they're going to go and just made the leads
ARAF said:
SturdyHSV said:
As it's always nice to get an update on these things, it was HT leads as suggested.
One of the MSD ones had been spoiled by a header, bit of a white mark etc. Anyway, chopped the end off it and it was a real mess in there.
Car is back running like it should do
A month to change the leads? 4 days per lead? One of the MSD ones had been spoiled by a header, bit of a white mark etc. Anyway, chopped the end off it and it was a real mess in there.
Car is back running like it should do
stigmundfreud said:
ARAF said:
SturdyHSV said:
As it's always nice to get an update on these things, it was HT leads as suggested.
One of the MSD ones had been spoiled by a header, bit of a white mark etc. Anyway, chopped the end off it and it was a real mess in there.
Car is back running like it should do
A month to change the leads? 4 days per lead? One of the MSD ones had been spoiled by a header, bit of a white mark etc. Anyway, chopped the end off it and it was a real mess in there.
Car is back running like it should do
MyM8V8 said:
stigmundfreud said:
ARAF said:
SturdyHSV said:
As it's always nice to get an update on these things, it was HT leads as suggested.
One of the MSD ones had been spoiled by a header, bit of a white mark etc. Anyway, chopped the end off it and it was a real mess in there.
Car is back running like it should do
A month to change the leads? 4 days per lead? One of the MSD ones had been spoiled by a header, bit of a white mark etc. Anyway, chopped the end off it and it was a real mess in there.
Car is back running like it should do
stigmundfreud said:
MyM8V8 said:
stigmundfreud said:
ARAF said:
SturdyHSV said:
As it's always nice to get an update on these things, it was HT leads as suggested.
One of the MSD ones had been spoiled by a header, bit of a white mark etc. Anyway, chopped the end off it and it was a real mess in there.
Car is back running like it should do
A month to change the leads? 4 days per lead? One of the MSD ones had been spoiled by a header, bit of a white mark etc. Anyway, chopped the end off it and it was a real mess in there.
Car is back running like it should do
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff