Gen-f free boost mod
Discussion
Initially I was looking at the lower gauge, but today I discovered that you can choose which gauge to show on EDI. So it is the upper one I am checking out now.
I know I am asking a lot now, but can you describe the steps you are taking to adjust it?
I loosen both bolts holding the bracket, then pull the bypass blade towards fully sealed position, ensure there is a 1mm gap between that and the set screw, position the valve so that it is tilted anticlockwise and tighten the bolts up.
Seems no rocket science...
I will se if I can get out on maybe Saturday or Sunday evening to have it checked with you. Thanks.
I know I am asking a lot now, but can you describe the steps you are taking to adjust it?
I loosen both bolts holding the bracket, then pull the bypass blade towards fully sealed position, ensure there is a 1mm gap between that and the set screw, position the valve so that it is tilted anticlockwise and tighten the bolts up.
Seems no rocket science...
I will se if I can get out on maybe Saturday or Sunday evening to have it checked with you. Thanks.
It also took me a while to figure out those gauges! I could come over to yours on Saturday evening if needed.
It is quite fiddly when you don't know what you are doing, one wrong move and you end up opening the valve as I found out, but once you know what you are doing it is simple. If you can get over here, I do have somewhere close by where we can test it out with full bore launches. Peak boost comes fairly close to max RPM so you generally need a passenger to be your spotter. My wife saw the 67kpa for me on the motorway up to Derby.
It is quite fiddly when you don't know what you are doing, one wrong move and you end up opening the valve as I found out, but once you know what you are doing it is simple. If you can get over here, I do have somewhere close by where we can test it out with full bore launches. Peak boost comes fairly close to max RPM so you generally need a passenger to be your spotter. My wife saw the 67kpa for me on the motorway up to Derby.
Thanks for the offer of coming to visit I will let you know, though. It would be great to meet over the weekend and chat about the experience so far. I am not sure what time I am going to finish my chores tomorrow, but I will send you a PM if there is prospect of meeting.
Thanks
Bart
Thanks
Bart
BartW said:
Thanks for the offer of coming to visit I will let you know, though. It would be great to meet over the weekend and chat about the experience so far. I am not sure what time I am going to finish my chores tomorrow, but I will send you a PM if there is prospect of meeting.
Thanks
Bart
You still got my number from the Ace Café meet?Thanks
Bart
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff