Throttle body

[mfp4073]

Is there a gasket between the throttle body and intake manifold on a 5.7 Monaro VZ?
If there is, can you use a tube of sealant when you bolt it back together,or are you better off with a proper gasket

thanks again John

[Glyn84]

I've used gasket paste on other cars without any issues when I haven't been able to get a gasket. It works without any problems but you do need to be careful to fully wipe any excess afterwards. You don't want bits of gasket breaking off into your intake

[KMud]

Yes, it should have a gasket - see here.

[mfp4073]

OK, thanks I'm just checking for air leaks and that everything is clean...... without messing it up!

Regards John

[stevieturbo]

It's a silicone sealing ring, not a gasket as such.

This normally remains in the inlet manifold and should rarely need replaced.

[mfp4073]

stevieturbo said:

It's a silicone sealing ring, not a gasket as such.

This normally remains in the inlet manifold and should rarely need replaced.

Even better news!....thanks.

Regards John