Tamora door

[Tamora s6]

Hi I have a fault with passanger door on my tam not opening from outside button.
Working fine from inside just checked button.making contact so replaced it
Any help on what to try next.Thanks 4 any help.

[shep1001]

Tamora s6 said:

Hi I have a fault with passanger door on my tam not opening from outside button.
Working fine from inside just checked button.making contact so replaced it
Any help on what to try next.Thanks 4 any help.

Loom plug between the door and the car. Alternatively swap the door ecu's over and see if the problem swaps to the other door

[Ant.]

Also, check the plug connection IN the door, where the mirror plugs into the door loom. Most likely place if the interior button works.

[Tamora s6]

Hi have checked plug in door and swapped ECU's same problem any ideas Thanks 4 any help

[shep1001]

Tamora s6 said:

Hi have checked plug in door and swapped ECU's same problem any ideas Thanks 4 any help

Must be with the loom somewhere as there is only 2 bits of wire between the switch and the ECU. Any chance the new switch is faulty? if its a push to make switch try bypassing the switch to check

Shep

[Tamora s6]

Hi thanks 4 the help. 1of the pins on plug inside door had come away
From from cable just joined it back on working fine. Am so happy again and it
Saved me getting going 2 steeler ship.