Engine ECU Pin Outs
Discussion
Hi there, does anyone have the pin outs for the Tamora Engine ECU. I have seen a diagram floating around for the Tuscan ECU, which has a single long oblong connector but the Tamora one has 3 smaller connectors so a different pin out.
I am trying to get my old one mended and I have it with an electronics expert, but he needs to know which pins are for the Lambda sensors.
The pins are set up in a square pattern and marked up A to D along the side and 1 to 8 along the top. So I am looking for something like pin A5 on the left hand connector when looking down on the aluminium lid.
Thanks in anticipation.
Bob
p.s. 2 e-mails to MBE have not resulted in any follow up contact from them.
I am trying to get my old one mended and I have it with an electronics expert, but he needs to know which pins are for the Lambda sensors.
The pins are set up in a square pattern and marked up A to D along the side and 1 to 8 along the top. So I am looking for something like pin A5 on the left hand connector when looking down on the aluminium lid.
Thanks in anticipation.
Bob
p.s. 2 e-mails to MBE have not resulted in any follow up contact from them.
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff