where can i get.....

[SteveSPG]

replacement plastic sleeves for the pedal box and the bonnet hinge . refreshing at the moment and a couple in the pedal box have broken,



and on the hinge they're not there so ive used an oversized washer but id prefer to get it sorted properly

[shep1001]

I will check my old bonnet hinges (assuming they are the same for the pedal box) I am fairly certain I had to re-use them though & they were brittle as f*uck when I teased them out of the fittings

[Sagi Badger]

For the bushes try Igus, 01604 677240. They manufacture plastic bearings and bushes, you will need dimensions and simple sketch etc. to order

J

[SteveSPG]

Sagi Badger said:

For the bushes try Igus, 01604 677240. They manufacture plastic bearings and bushes, you will need dimensions and simple sketch etc. to order

J

spot on, thanks!

chaps at igus made a pack of bushes for the tvr pedal box, and they're still available of you scour their website. for example the bonnet ones are iglidur 0810038 i believe

Edited by SteveSPG on Tuesday 6th January 17:27

[shep1001]

SteveSPG said:

spot on, thanks!

chaps at igus made a pack of bushes for the tvr pedal box, and they're still available of you scour their website. for example the bonnet ones are iglidur 0810038 i believe

Edited by SteveSPG on Tuesday 6th January 17:27

might get a set of each as mine won't survive being removed a second time!

[Ant.]

SteveSPG said:

spot on, thanks!

chaps at igus made a pack of bushes for the tvr pedal box, and they're still available of you scour their website. for example the bonnet ones are iglidur 0810038 i believe

Edited by SteveSPG on Tuesday 6th January 17:27

Steve, the website seems to not be very friendly, where did you find the bonnet ones?

[SteveSPG]

http://www.igus.co.uk/Search?q=jfm%200810038


the site is not easy, but search for jfm 0810038 iglidur