Anderson plug and stainless battery clamp
Discussion
I forgot to add that I also removed the anderson plug and replaced the rotten battery clamp for a stainless steel item.
Treated the rust in the tray area too.
I noticed that the welded flange didn't go over the clamp so a bit of cold forming to turn it up.
Anderson plug was in pretty poor state so good timing.
So I now have a battery that is properly held in place and have removed a fire hazard.
Treated the rust in the tray area too.
I noticed that the welded flange didn't go over the clamp so a bit of cold forming to turn it up.
Anderson plug was in pretty poor state so good timing.
So I now have a battery that is properly held in place and have removed a fire hazard.
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff