Where do i find the door ECU on my T350c

Where do i find the door ECU on my T350c

Author
Discussion

garyt350

Original Poster:

10 posts

119 months

Sunday 28th June 2015
quotequote all
Hi all

Where can i find the door ECU for my T350c. i have an issue with the drivers side window not working when i push the button.

K4TRV

1,819 posts

252 months

Sunday 28th June 2015
quotequote all
Hi, the ECU is to the right of the pedals in the drivers footwell. There you will find the Dash ECU etc all held there by large quantities of Velcro.

Have you tried some WD 40 on the buttons? They can "stick" and so much easier to cure than sticking your head down the foot well??

HTH's ?

T

garyt350

Original Poster:

10 posts

119 months

Thursday 2nd July 2015
quotequote all
hi there thx for that i will give that a go first, if that doesnt work i'll try and locate the ECU......Cheers Gary

billynobrakes

2,675 posts

265 months

Thursday 2nd July 2015
quotequote all
Does the window drop when you open the door, if it does then it could be the ECU if it does not drop it could be a break in the wires going through the panel on the inside of the footwell run your hand up the inside of the footwell near the door and you will find a load of wires going into a plug undo the cover where it goes though the panel and mice he wires around and press the button for the window

Worked for me

garyt350

Original Poster:

10 posts

119 months

Wednesday 15th July 2015
quotequote all
Ok i will give it a go.......The window has dropped but has stayed in the dropped position and wont work on the button.

NailedOn

3,114 posts

235 months

Sunday 19th July 2015
quotequote all
garyt350 said:
Ok i will give it a go.......The window has dropped but has stayed in the dropped position and wont work on the button.
I had this on my T350c a while ago.
The problem was the button which needed taking out an cleaning. Simple as that!
Maybe that is all that is needed and worth a go.
(Thx to John at David Gerald c.2008.)