Flywheel bolts for SR20DET

Flywheel bolts for SR20DET

Author
Discussion

romee2000

Original Poster:

121 posts

124 months

Monday 17th November 2014
quotequote all
Doing an AT to MT conversion on an SR20DET and need new flywheel bolts. Nissan dealers were useless with half of them claiming to never have heard of an SR20DET model when in fact its an engine lol.

Covered all the usual avenues like Driftworks etc but will try here too. Need them ASAP for my build
Anyway, has anyone one out there got any?

Thanks!!

sparkyhx

4,143 posts

203 months

Monday 17th November 2014
quotequote all
romee2000 said:
Doing an AT to MT conversion on an SR20DET and need new flywheel bolts. Nissan dealers were useless with half of them claiming to never have heard of an SR20DET model when in fact its an engine lol.

Covered all the usual avenues like Driftworks etc but will try here too. Need them ASAP for my build
Anyway, has anyone one out there got any?

Thanks!!
tried SXOC?

Hammer67

5,706 posts

183 months

Monday 17th November 2014
quotequote all
A quick look at Nissan catalogue for these for a UK N14 GTIR with SR20DET produces part number 12315-54C05. 8 required.

HTH.

sparkyhx

4,143 posts

203 months

Monday 17th November 2014
quotequote all
Hammer67 said:
A quick look at Nissan catalogue for these for a UK N14 GTIR with SR20DET produces part number 12315-54C05. 8 required.

HTH.
not sure if they are the same. GTIR was not RWD - I assume you are talking a SR20DET for 200sx?

Hammer67

5,706 posts

183 months

Monday 17th November 2014
quotequote all
sparkyhx said:
Hammer67 said:
A quick look at Nissan catalogue for these for a UK N14 GTIR with SR20DET produces part number 12315-54C05. 8 required.

HTH.
not sure if they are the same. GTIR was not RWD - I assume you are talking a SR20DET for 200sx?
Righty Ho, part number for S14 manual SR20DET is 12315-52F00 again 8 required.
Thinking about it from my years at Nissan dealer these are fooking expensive ~ IIRC something like £10 to £15 each.

HTH again.

sparkyhx

4,143 posts

203 months

Tuesday 18th November 2014
quotequote all
Hammer67 said:
sparkyhx said:
Hammer67 said:
A quick look at Nissan catalogue for these for a UK N14 GTIR with SR20DET produces part number 12315-54C05. 8 required.

HTH.
not sure if they are the same. GTIR was not RWD - I assume you are talking a SR20DET for 200sx?
Righty Ho, part number for S14 manual SR20DET is 12315-52F00 again 8 required.
Thinking about it from my years at Nissan dealer these are fooking expensive ~ IIRC something like £10 to £15 each.

HTH again.
of course I'm assuming its a 200sx, otherwise driftworks would be a odd place to seek GTIR bits.

romee2000

Original Poster:

121 posts

124 months

Wednesday 19th November 2014
quotequote all
Thanks for all the replies! These were a pain to source but thankfully, I managed to find some second hand ones on Driftworks. Not ideal as I would prefer new, but needs must and it is the last bit of the jigsaw before the engine can go in.

Thanks again!

boroandy87

168 posts

121 months

Wednesday 19th November 2014
quotequote all
Make sure they are within limits before you use those.

Think its called a stretch gauge you need to use on them to measure the stress on them as they are stress bolts IIRC