Mk1 MR2 new start-up sound

Mk1 MR2 new start-up sound

Author
Discussion

Sponge Bob

Original Poster:

226 posts

247 months

Friday 5th August 2005
quotequote all
I'm getting a whiring sound from start-up which lasts for a few seconds only...

It is only when the engine is cold, i.e. only first thing in the morning - but it has only just started happening...

Anyone have any ideas as to what it could be - it's not the radiator fan as I have watched it while someone else starts the car

Cheers

andy mac

73,668 posts

256 months

Friday 5th August 2005
quotequote all
Is it a pump of some sort? Water, or something??

tuttle

3,427 posts

238 months

Friday 5th August 2005
quotequote all
High pitched squeal for a few secs when cold? Often associated with belts.Possibly one or more may need just tightening a fraction.Check for wear/cracks/splits JIC.

Sponge Bob

Original Poster:

226 posts

247 months

Friday 5th August 2005
quotequote all
I sounds like a pump, not high pitched as such - but there is no problem running the car at the moment... perhaps whatever is making the sound is on the way out?

wedgepilot

819 posts

284 months

Friday 5th August 2005
quotequote all
I'd say belts too. Check for excessive play, or any fraying.

Sponge Bob

Original Poster:

226 posts

247 months

Tuesday 9th August 2005
quotequote all
It doesn't at initial glance appear to be any of the belts - could it be the started motor on it's way out... I wish it was easier to fault find.... grrr

dern

14,055 posts

280 months

Tuesday 9th August 2005
quotequote all
Don't know the mr2 engine but I'd be looking in the receipts for the car that you may have for evidence of when the cambelt was changed and if the tensionser (if you have such a thing) was changed at the same time. If the water pump is driven by the cambelt I'd be checking if you have a receipt for that too.

The only reason I mention this is because the tensioner in my golf mk2 16v started sporadically siezing causing short squeels from the engine shortly before it siezed which would have broken the belt if I hadn't been alerted by the cloud of smoke. I imagine that if I was paying attention and was more familiar with the car I may have heard the rumbling of the bearing on the way out before hand.

I'm lead to believe that the 4age (if that's what you've got) is a non-interference design so a cambelt break wouldn't be the end of the world... if it were mine I would verify that and even then be loathed to put it to the test

Mark