e36 328 manifold

[gav dunn]

Hi, ive got a e36 328, want to know if the e36 m3/evo exhaust headers (manifold) will bolt straight on to my engine. Thanks

[TheEnd]

Yep, although they won't fit the rest of the original 328i exhaust.

[gav dunn]

Thanks. My plan is to modify my exhaust from the manifolds back. Im going to modify the engine alot, so i need to make sure i can get the exhaust gas out quick as poss!!

[V8mate]

I've got a set of M3 headers and a custom stainless decat system I took off my old 328.

It's a bit of a faff getting the headers on/off; you need to lift the engine and move the steering column.

Available to a good home for a reasonable portion of beer tokens.

[gav dunn]

How much do you want? You said, moving the sterring column.!!

[V8mate]

M3 headers are £250 on eBay so... £300 for the lot?

I moved the steering column but still couldn't get them off, so then lifted the engine. Maybe, if you lifted the engine, you could do it with the steering column intact.

Dunno

[andyiley]

That is a long length of single tube rather than the dual pipes full length of the standard system. Surely that will negate the gains in flow of putting on the M3 manifolds?

I went for a full M3 system front to rear and replaced the cats with universal 4" stainless silencers.

I had to keep my eyes open, but bought the headers for £50 & the rest for £150.

Edited by andyiley on Sunday 26th July 07:11

[gav dunn]

Will the m3 3.2 evo exhaust manifolds fit a 328 engine??

[TheEnd]

Yep, and a better option than the M3 3.0 as they have the mountings for the lambda sensors.

[andyiley]

^^^^^ Wot 'e said.

[andyiley]

Still...... Although they still won't fit the rest of the exhaust either.