A picture a day....biker banter (Vol 3)

[moanthebairns]

Rebuilt the track bikes brakes today.
All lovely and clean, with new pads and seals.

The internal pillars were also great.

[Prof Prolapse]

Top job mate

[dapearson]

That looks satisfying!

[moanthebairns]

A friend randomly gave me some (horribly) framed photos of some of my track days. Rather random but a nice gift.

[Otter Smacker]

Went for a trip to Lincoln for a last bit of Christmas shopping when I stumbled upon this in the car park just down by Westgate, opposite the Prince of Wales Pub.

Anyones here?

[Mad Jock]

moanthebairns said:

Rebuilt the track bikes brakes today.
All lovely and clean, with new pads and seals.

The internal pillars were also great.

Did you really clean those callipers in your Mum's dishwasher?

[Yazza54]

SRAD out, big orange thumper in

[Hooli]

moanthebairns said:

Rebuilt the track bikes brakes today.
All lovely and clean, with new pads and seals.

The internal pillars were also great.

That model kit is gonna be huge if those are part of it.

[Jazoli]

Yazza54 said:

SRAD out, big orange thumper in

Very nice, spec? better pictures? some more info rather than a moody garage shot, you kept that one quiet.

[SAS Tom]

Pretty extensive spec, I'm sure Yazza will be along with the details.

[redback911]

Nice to finally post on a PH bike thread.



A slightly early Xmas and 40th Birthday present from wifey. Considering she also specced the Termignoni, she is definitely a keeper (wife and the bike) ;-)

[paul25]

Some old photos, ohh happy days

formula 400 snetterton

Edited by paul25 on Monday 22 December 16:13

[Biker's Nemesis]

paul25 said:

ohh happy days

Bah, I was rough this morning, did you go for the meal with me? I can hardly remember anything after 9pm.

[paul25]

Biker's Nemesis said:

paul25 said:

ohh happy days

Bah, I was rough this morning, did you go for the meal with me? I can hardly remember anything after 9pm.

No didn't go, haha, don't forget that 20 quid I lent you

[Biker's Nemesis]

paul25 said:

don't forget that 20 quid I lent you

Yeah, right!

[Yazza54]

Jazoli said:

Yazza54 said:

SRAD out, big orange thumper in

Very nice, spec? better pictures? some more info rather than a moody garage shot, you kept that one quiet.

Got no decent pics yet.

Spec copied from the ad


Gen 1 2001 frame
Ohlins non radial forks with uprated ohlins springs (10.5nm) and spare standard and 9.5nm springs
Ohlins rear shock with remote preload adjuster
Brembo 4 pad calipers with new Bendix race pads
Floating wavey disks and braided brake lines
Ohlins steering damper
Brembo Radial Clutch master cylinder
New Brembo 19/20 master cylinder and lever
Harris rearsets
Single seat lightweight modified rear sub frame
Fresh paint job this season with only a few marks
Adjustable clip ons
Renthal Kevlar Grips
Brake lever protector

Gen 2 engine from low mileage 2007 bike
Power Commander 3 USB
Race pattern Dynojet quick shifter - just sold this on ebay don't wanna run race pattern
57mm throttle bodies
Renegade carbon air box and foam filter, uses the tank as the airbox
Billet clutch slave cylinder and braided line
Edwards air tubes
Full titanium Akrapovic exhaust
STM slipper clutch
124.48 bhp at the wheel
Sitting on good Metzler Comp K slicks on Brembo wheels, another set of brembo wheels with discs for wets
520 chain and sprockets
Brand new electrix stator and converted to use the mosfet style 07 Honda CBR600/1000RR rectifier

Decent box of spares, sprockets etc. Gonna do a few bits and see how I like it. If I gel with it I'll pick up a set of OZ lightweight wheels and maybe a new QS.

[Jazoli]

Yazza54 said:

If I gel with it I'll pick up a set of OZ lightweight wheels and maybe a new QS.

If not you are going to sell it to me

[Biker's Nemesis]

Yazza54 said:

Got no decent pics yet.

Spec copied from the ad


Gen 1 2001 frame
Ohlins non radial forks with uprated ohlins springs (10.5nm) and spare standard and 9.5nm springs
Ohlins rear shock with remote preload adjuster
Brembo 4 pad calipers with new Bendix race pads
Floating wavey disks and braided brake lines
Ohlins steering damper
Brembo Radial Clutch master cylinder
New Brembo 19/20 master cylinder and lever
Harris rearsets
Single seat lightweight modified rear sub frame
Fresh paint job this season with only a few marks
Adjustable clip ons
Renthal Kevlar Grips
Brake lever protector

Gen 2 engine from low mileage 2007 bike
Power Commander 3 USB
Race pattern Dynojet quick shifter - just sold this on ebay don't wanna run race pattern
57mm throttle bodies
Renegade carbon air box and foam filter, uses the tank as the airbox
Billet clutch slave cylinder and braided line
Edwards air tubes
Full titanium Akrapovic exhaust
STM slipper clutch
124.48 bhp at the wheel
Sitting on good Metzler Comp K slicks on Brembo wheels, another set of brembo wheels with discs for wets
520 chain and sprockets
Brand new electrix stator and converted to use the mosfet style 07 Honda CBR600/1000RR rectifier

Decent box of spares, sprockets etc. Gonna do a few bits and see how I like it. If I gel with it I'll pick up a set of OZ lightweight wheels and maybe a new QS.

Is it a Ducati or a RSV? I can't tell from the pictures?

I would have stuck with a race shift if I were you, start as you mean to go on.

I'm looking forward to getting out ion track with you lot next year as I am not doing as many foreign ones.

[Jazoli]

Its this beast



A Mille

Biker's Nemesis said:

I'm looking forward to getting out ion track with you lot next year as I am not doing as many foreign ones.

Me too, the old stagers better watch out

[Yazza54]

Mille john, Dave beat me to it though!

I'm really looking forward to next year too.