A picture a day....biker banter (Vol 3)
Discussion
Hooli said:
Sorry I didn't see your post in time, but I did take these later in the ride.
I bet the bike's happy. I distinctly remembering you promising you would strip it down, powder coat the frame and do the whole clean it with a toothbrush number when it reached that magic number.
moto_traxport said:
Hooli said:
Sorry I didn't see your post in time, but I did take these later in the ride.
I bet the bike's happy. I distinctly remembering you promising you would strip it down, powder coat the frame and do the whole clean it with a toothbrush number when it reached that magic number.
Paul Hollywood on his H2. I wonder if he is a decent rider. He has an 1199 too, I wonder if he's a as good on the bike as he is at knocking out a perfectly formed spanakopita.
Maybe it's just the photo but what an unflattering angle for the H2. It looks like 3 different bikes melded into one horrific creation. You can't fault the engineering though.
Maybe it's just the photo but what an unflattering angle for the H2. It looks like 3 different bikes melded into one horrific creation. You can't fault the engineering though.
Mastodon2 said:
Paul Hollywood on his H2. I wonder if he is a decent rider. He has an 1199 too, I wonder if he's a as good on the bike as he is at knocking out a perfectly formed spanakopita.
Maybe it's just the photo but what an unflattering angle for the H2. It looks like 3 different bikes melded into one horrific creation. You can't fault the engineering though.
Who?Maybe it's just the photo but what an unflattering angle for the H2. It looks like 3 different bikes melded into one horrific creation. You can't fault the engineering though.
Mastodon2 said:
A bloke with an H2.
I had to google him, sadly I don't spend my life watching cooking programmes, ending up starving after all they go on about is how easy it is to knock this up in 30 minutes, only to go to my kitchen and find I don't have watercress salad or a scallop so I make do with beans on toast or mcds. 
t.theshrew said:
How many of those have you piled on it old bean ?
I've owned it since Oct 2007 and it had 7,452miles show when I first rode it.Today's task list doesn't include powder coating but I will clean it along with....
Change fork oil
Check n grease steering bearings
Grease levers n throttle tube
Rebuild the callipers
Replace side cover gaskets to cure oil leaks
Oil n filter change
Put it's 3rd set of plugs in
And it's 3rd air filter
Check valve clearances
Adjust chain
Might grease swing arm pivot if I can work out a way to lift it
Fix my oiler as the nozzle keeps moving
Should be enough for one day.
Hooli said:
I've owned it since Oct 2007 and it had 7,452miles show when I first rode it.
Today's task list doesn't include powder coating but I will clean it along with....
Change fork oil
Check n grease steering bearings
Grease levers n throttle tube
Rebuild the callipers
Replace side cover gaskets to cure oil leaks
Oil n filter change
Put it's 3rd set of plugs in
And it's 3rd air filter
Check valve clearances
Adjust chain
Might grease swing arm pivot if I can work out a way to lift it
Fix my oiler as the nozzle keeps moving
Should be enough for one day.
That's good going Hooli, now get it cleaned like you said you would!Today's task list doesn't include powder coating but I will clean it along with....
Change fork oil
Check n grease steering bearings
Grease levers n throttle tube
Rebuild the callipers
Replace side cover gaskets to cure oil leaks
Oil n filter change
Put it's 3rd set of plugs in
And it's 3rd air filter
Check valve clearances
Adjust chain
Might grease swing arm pivot if I can work out a way to lift it
Fix my oiler as the nozzle keeps moving
Should be enough for one day.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff