Not a happy gasket

Not a happy gasket

Author
Discussion

carl b

Original Poster:

55 posts

130 months

Wednesday 13th May 2015
quotequote all


Seems we have an issue

carl b

Original Poster:

55 posts

130 months

Wednesday 13th May 2015
quotequote all
Knots of stuff going on then

fatboy18

18,930 posts

210 months

Thursday 14th May 2015
quotequote all
Did you get a set of replacement Gaskets OK?

I have a set in my Garage I have not used yet if you need them smile

With that Exhaust manifold you should be able to lay it on a flat piece of Glass and check the surfaces are true flat.

Edited by fatboy18 on Thursday 14th May 09:23

carl b

Original Poster:

55 posts

130 months

Thursday 14th May 2015
quotequote all
Thank you I got a gasket from Chrysler UK and am getting the manifold skimmed

carl b

Original Poster:

55 posts

130 months

Thursday 14th May 2015
quotequote all
Thank you I got a gasket from Chrysler UK and am getting the manifold skimmed

fatboy18

18,930 posts

210 months

Thursday 14th May 2015
quotequote all
No Problem smile

Dr-Bob

6,629 posts

259 months

Thursday 14th May 2015
quotequote all
Sounds like your hetting there mate.....

carl b

Original Poster:

55 posts

130 months

Saturday 16th May 2015
quotequote all
Seems the cutting out issue has been addressed and AEM is behaviing itself. Both exhaust housings have been changed to smaller ones. The transmission pump still to wire up and the stupid clifford alarm to sort out but its getting there. There will be some re mapping to be done too i suspect