|
900T-R
18,560 posts
126 months
|
Great work!  Will you be making & selling the pre-serp SC pulleys for other Tivvers to buy, too? 
|
|
|
450Nick
3,469 posts
81 months
|
John, absolutely fantastic work - and some lovely fabrication. I only wish I had your machine shop! How long have you had your Chim? I used to work up at the Bacton plant and lived in Wroxham for a while, so used to blast through the area about 3 years ago. If you're free this weekend, I'll be down at Snetterton with the TVR Racing guys for the Tuscan Challenge racing. Feel free to head down and say hi - there are some fantastic cars out this weekend, and if you need any info on Emeralds and SC Chims come and find me!
|
|
|
Engineer1949
Original Poster
300 posts
13 months
|
thanks for the offer nick,will be ther on the sunday got stuff on tomorrow,had the car since the begining of this thread bought as basket case.
john
|
|
|
Engineer1949
Original Poster
300 posts
13 months
|
|
|
Engineer1949
Original Poster
300 posts
13 months
|
the modified kit for the preserp will be available hopefully through sc power as they supply the bulk of the equipment required, i will fabricate the parts as you see them plus be available for advise and help or indeed instalations.
john
|
Advertisement
|
|
|
haircutmike
6,715 posts
73 months
|
John, I would sort out your heater pipe connections before you drop the body on as access there is poor behind the plenum!
|
|
|
Engineer1949
Original Poster
300 posts
13 months
|
|
|
SILICONEKID340HP
8,368 posts
100 months
|
Looking good is it stadard procedure to fit the trigger wheel sensor on that side ,mine is close to the exhaust on the other side,im wondering if mine can be moved..cheers
|
|
|
Engineer1949
Original Poster
300 posts
13 months
|
i dont think you can fit the wheel behind on the serpentine engine not sufficient room,i had originally fitted the trigger to the front of the pulley myself but felt that having it behind away from the heat would be a better bet and as this is all new development i try to get it right for the outset.
john
|
|
|
900T-R
18,560 posts
126 months
|
Engineer1949 said: the modified kit for the preserp will be available hopefully through sc power as they supply the bulk of the equipment required, i will fabricate the parts as you see them plus be available for advise and help or indeed instalations.
john Cool, all of three enquiries I had so far for SC systems were for pre-serps for whatever reason...
|
|
|
Engineer1949
Original Poster
300 posts
13 months
|
well bodywork time now got the offside front wing all repaired filled and faired ready for primer then the rest of the body tub,seats dash centre console door cards all at the trimmers plus have sourced some nice braided conduit for the engine bay,all the paints and primers turned up today from movac cant wait to get some colour on. john  
|
|
|
edo
12,540 posts
134 months
|
|
|
Engineer1949
Original Poster
300 posts
13 months
|
The colour is going to be orange with black wheels similar to the repsol honda colour.
John
|
|
|
Grey Ghost
2,761 posts
89 months
|
Engineer1949 said: The colour is going to be orange with black wheels similar to the repsol honda colour.
John We really should have guessed that from the colour you have painted the engine and other parts, sound choice
|
|
|
Engineer1949
Original Poster
300 posts
13 months
|
repairs finally finished just a couple of pin holes to fill looks so much better with the etched primer on,also got the last of the shock bushes pushed in and the remaining diff mount done, off the the north york moors for a week so no updates till we are back. john   
|
|
|
dbv8
5,691 posts
89 months
|
Stick a nut on the back of that diff bracket bolt.
Top job btw.
|
|
|
CHIMV8
1,233 posts
90 months
|
Engineer1949 said: repairs finally finished just a couple of pin holes to fill looks so much better with the etched primer on,also got the last of the shock bushes pushed in and the remaining diff mount done, off the the north york moors for a week so no updates till we are back. john Glad yo are coming to Gods country...you may never go back...time for a PAS installation
|
|
|
Engineer1949
Original Poster
300 posts
13 months
|
That is the very next job on return
Nuts fitted just took pic a bit early.
John
|
|
|
Engineer1949
Original Poster
300 posts
13 months
|
|
|
chris2002hk
135 posts
31 months
|
How much would this car cost me to buy off you when done? I need a perfect example to export !
|
|
