And so it begins....................

[SILICONEKID343HP]

Now that's more like it ,lovely job .. How much time is involved removing and refitting the new loom .

Do you have to remove the bottom dash .

[phazed]

About 8 easy hours to fit the loom, quite enjoyable snapping on those connectors

You can do it without removing any of the dash.

[SILICONEKID343HP]

phazed said:

About 8 easy hours to fit the loom, quite enjoyable snapping on those connectors

You can do it without removing any of the dash.

The problem is my grounds are all wrong so could he still build me a loom if the original wiring is wrong .

[phazed]

The new loom has all new earths so no problems there.

Make sure you bolt them securely to the rear of the nearside head.

Just tried a cautious start.
Battery crap and didn't manage much

Hey ho will buy a new one.

At least it has a lightweight hi-torque starter.

[SILICONEKID343HP]

phazed said:

The new loom has all new earths so no problems there.

Make sure you bolt them securely to the rear of the nearside head.

Just tried a cautious start.
Battery crap and didn't manage much

Hey ho will buy a new one.

At least it has a lightweight hi-torque starter.

How do you get to that area ,It`s impossible. Do you get to it from underneath ? Does it come with all the ends made like the one for the trigger sensor.

Edited by SILICONEKID343HP on Monday 23 September 21:11

[phazed]

SILICONEKID343HP said:

How do you get to that area ,It`s impossible. Do you get to it from underneath ? Does it come with all the ends made like the one for the trigger sensor.

Edited by SILICONEKID343HP on Monday 23 September 21:11

If you mean the back of the head Daz? My 95 could be accessed from the top with a ratchet spanner but the 99 has a revised bulkhead so I used about 5 extensions and a swivel head from below and back, a bit of a fiddle!

[phazed]

Good news!

Shaun the mapper is mapping in London tomorrow and is coming to mine on Thursday first thing, yippee.

If all goes to plan and I haven't err, fooked up, we should have a runner later that day!

Better insure it I guess.....................;)

[NickM450]

That is good news. Can we have some more pics and maybe a video or two please Peter, pretty please

[phazed]

Will do, I'm feeling positive

[SILICONEKID343HP]

phazed said:

Will do, I'm feeling positive

Got to be better than last time !

[phazed]

Just had the car electrically and electronically fettled by Shaun, (MS2Tuning).

Everything checked and the map tweaked.

Bad points,

Ride height low
Dampers set far too hard.
Stupid standard seats are like sitting on a sofa.

Good points,

Super warp drive + sounds like a messerschmitt............. makes my 4.6 feel tame, makes the Boxster 2.5 I drove last night seem like a hatchback, (although the build quality is something else!).

Generally,.....................................megahappy

Edited by phazed on Thursday 26th September 17:26

[db484bhpv8]

Excellent news.
Get it tweaked to how you like it and let me know when you are ready to 1/4 mile test it.

[carsy]

Good one Peter

[carsy]

What power are you hoping for ?

[SILICONEKID343HP]

Looks like you are going to be the king of the track , you can now show the engine bay off at those Goodwood breakfast club meets ..It might even end of as a garage queen

[phazed]

carsy said:

What power are you hoping for ?

370bhb/430torque, maybe

[Alexdaredevils]

carsy said:

What power are you hoping for ?

2nd place

[Alexdaredevils]

carsy said:

What power are you hoping for ?

2nd place

[phazed]

Alexdaredevils said:

2nd place

Careful, we're watching you

[Alexdaredevils]

phazed said:

Careful, we're watching you

So are my heads