Sheared drop link bracket :(

[zacherynuk]

Hi guys,

Should this be

a) welded (looks doubtful)
b) replaced by itself (probably more labour than new wishbone ? - if so where from ?)
c) entire lower wishbone replaced - where from?

Any thoughts ?

Thanks for you advice!

Should I ask the garage to pre-order this: http://www.clever-trevor.net/TVR/Parts_details/D01...
And these for good measure? - http://www.clever-trevor.net/TVR/Parts_details/LD0...


Zach

Edited by zacherynuk on Friday 25th July 09:31

[phazed]

You need a pair of these.

http://www.google.co.uk/#q=chimaera+drop+link+brac...

[zacherynuk]

phazed said:

You need a pair of these.

http://www.google.co.uk/#q=chimaera+drop+link+brac...

I need two ?

[phazed]

1 for each side,.... eventually.

These are reinforced and are stronger.

[zacherynuk]

phazed said:

1 for each side,.... eventually.

These are reinforced and are stronger.

Fair enough ta!

[jojackson4]

Made mine in 25 mins aside
I did have the wish bones off for welding
Quick fix 2" square washer welded on with a 8 mm hole I think you can do that on the car