has anyone got
Discussion
SILICONEKID345HP said:
Probably not Daz. Most injectors these days are designed to run at 3bar or above. It was only the original Lucas ones that were designed to run at 2.5.If your running yours at 2.5 they are probably a bit big for your needs.
You will be getting less of a spray at 2.5bar but i wouldnt be too concerned as most of the fuel is sprayed on to a closed inlet valve anyway. Its not as tho is direct injection needing a nice fine spray.
macdeb said:
Just PM me your address bloke and I'll send.
Cheers its been running at 2.3 bar because thee adjustable regulator has dropped when i fit the 2.6 bar regulator, will it need remapping ? If it does i might as well get a 3 bar one .Edited by SILICONEKID345HP on Saturday 7th March 20:08
carsy said:
Probably not Daz. Most injectors these days are designed to run at 3bar or above. It was only the original Lucas ones that were designed to run at 2.5.
If your running yours at 2.5 they are probably a bit big for your needs.
You will be getting less of a spray at 2.5bar but i wouldnt be too concerned as most of the fuel is sprayed on to a closed inlet valve anyway. Its not as tho is direct injection needing a nice fine spray.
This chart seems to show i have the correct injectors If your running yours at 2.5 they are probably a bit big for your needs.
You will be getting less of a spray at 2.5bar but i wouldnt be too concerned as most of the fuel is sprayed on to a closed inlet valve anyway. Its not as tho is direct injection needing a nice fine spray.
http://www.rceng.com/technical.aspx
Edited by SILICONEKID345HP on Saturday 7th March 21:41
Edited by SILICONEKID345HP on Monday 9th March 18:32
phazed said:
No, from memory, Accel 30lb injectors.
According to the chart 8x30lb injectors at 36psi will only give 350bhp at 80% on a n/A enginehttp://fuelinjectorclinic.com/flow-calculator
has anyone got a spare centre console ( the 2 pieces along the transmission tunnel? for A t5 chimaera. I'll be recovering them so as long as the fibreglass is complete. Happy to talk prices/postage. I know i can get from breakers on ebay, but would prefer to source from an enthusiast if that helps. thanks
Gassing Station | Chimaera | Top of Page | What's New | My Stuff