has anyone got
Discussion
SILICONEKID345HP said:
Do you have a link for the 3 bar regulator . I think the Bosch Gen 111 are designed to work at 3bar .
Sorry Daz, mean't to put the link in my last post, here you gohttp://www.jmgshop.com/performance-30-bar-fuel-pre...
Sardonicus said:
Here you go Daz just quote the part number on the body, also Pierburg did an equivalent part (both brands were fitted to 80's BMW's OE)
Simon this is the Pierburg £53 Does it look correct ?http://www.buycarparts.co.uk/bmw/3-convertible-e30...
macdeb said:
Daz, I've posted mine to you, why look for something else???
If not required, please send back
Mac once i find out if my injectors will work on a 2.5 bar regulator i will fit it ,if it needs to be a 3bar i will ether send it back or bring it with me at the next meet .If not required, please send back
Just want to get it right ,i can`t get an answer from Fiveo and Bosch .
They are 30lb Gen 111 Bosch. A bit of research tells me They are a 4 hole disc style rather than a pintle design
If anyone can help much appreciated .
http://www.bimmerforums.com/forum/showthread.php?2...
Edited by SILICONEKID345HP on Wednesday 11th March 22:32
Just to confirm if anyone goes for the Gen111 Bosch Fiveo injectors to they will give the same spray pattern at 2.5bar ..
I sent this message this message to Fiveo in calinfornia.
MESSAGE: Hello will the Bosch Gen111 30lb injectors give a good spray
pattern at 2.5 bar or are they not designed to work at that pressure thanks
Answer
Hi Daren,
These injectors will operate just fine at the lower fuel pressure of 2.5
bar. The spray pattern will be the same, they will just supply slightly
less fuel per cycle.
Thank you for contacting FiveoMotorsport.
Kirk Holt
FiveoMotorsport, Inc.
562.867.4999
All sorted the 2.5Bar regulator courtesy of Mac will be fitted .
Thanks all .
I sent this message this message to Fiveo in calinfornia.
MESSAGE: Hello will the Bosch Gen111 30lb injectors give a good spray
pattern at 2.5 bar or are they not designed to work at that pressure thanks
Answer
Hi Daren,
These injectors will operate just fine at the lower fuel pressure of 2.5
bar. The spray pattern will be the same, they will just supply slightly
less fuel per cycle.
Thank you for contacting FiveoMotorsport.
Kirk Holt
FiveoMotorsport, Inc.
562.867.4999
All sorted the 2.5Bar regulator courtesy of Mac will be fitted .
Thanks all .
I`m wondering if this Pierburg will replace the Bosch 3 bar fuel regulator .
http://www.buycarparts.co.uk/bmw/3-convertible-e30...
http://www.buycarparts.co.uk/bmw/3-convertible-e30...
SILICONEKID345HP said:
I`m wondering if this Pierburg will replace the Bosch 3 bar fuel regulator .
http://www.buycarparts.co.uk/bmw/3-convertible-e30...
Yes BMW fitted both during production in the 80'shttp://www.buycarparts.co.uk/bmw/3-convertible-e30...
Does anyone have a spare AFM to plenum elbow hose, hosing to fit the flame trap or heat shield to wrap around the induction hose? Am in the process of tidying the engine bay at the moment and there is some strange substance permanently ingrained on mine!
Beer tokens and postage covered of course...
T
Beer tokens and postage covered of course...
T
Gassing Station | Chimaera | Top of Page | What's New | My Stuff