has anyone got

[Sardonicus]

Here you go Daz just quote the part number on the body, also Pierburg did an equivalent part (both brands were fitted to 80's BMW's OE)

[Andav469]

SILICONEKID345HP said:

Do you have a link for the 3 bar regulator . I think the Bosch Gen 111 are designed to work at 3bar .

Sorry Daz, mean't to put the link in my last post, here you go

http://www.jmgshop.com/performance-30-bar-fuel-pre...

[SILICONEKID345HP]

Sardonicus said:

Here you go Daz just quote the part number on the body, also Pierburg did an equivalent part (both brands were fitted to 80's BMW's OE)

Simon this is the Pierburg £53 Does it look correct ?

http://www.buycarparts.co.uk/bmw/3-convertible-e30...

[macdeb]

Daz, I've posted mine to you, why look for something else???
If not required, please send back

[SILICONEKID345HP]

macdeb said:

Daz, I've posted mine to you, why look for something else???
If not required, please send back

Mac once i find out if my injectors will work on a 2.5 bar regulator i will fit it ,if it needs to be a 3bar i will ether send it back or bring it with me at the next meet .

Just want to get it right ,i can`t get an answer from Fiveo and Bosch .

They are 30lb Gen 111 Bosch. A bit of research tells me They are a 4 hole disc style rather than a pintle design

If anyone can help much appreciated .

http://www.bimmerforums.com/forum/showthread.php?2...

Edited by SILICONEKID345HP on Wednesday 11th March 22:32

[SILICONEKID345HP]

Just to confirm if anyone goes for the Gen111 Bosch Fiveo injectors to they will give the same spray pattern at 2.5bar ..

I sent this message this message to Fiveo in calinfornia.

MESSAGE: Hello will the Bosch Gen111 30lb injectors give a good spray
pattern at 2.5 bar or are they not designed to work at that pressure thanks


Answer

Hi Daren,

These injectors will operate just fine at the lower fuel pressure of 2.5
bar. The spray pattern will be the same, they will just supply slightly
less fuel per cycle.

Thank you for contacting FiveoMotorsport.

Kirk Holt
FiveoMotorsport, Inc.
562.867.4999

All sorted the 2.5Bar regulator courtesy of Mac will be fitted .

Thanks all .

[Dungman]

A pair of rear cabin vents? Just removed the nasty speakers that were lurking there and would rather go back to standard. Thanks

[SILICONEKID345HP]

I`m wondering if this Pierburg will replace the Bosch 3 bar fuel regulator .

http://www.buycarparts.co.uk/bmw/3-convertible-e30...

[Sardonicus]

SILICONEKID345HP said:

I`m wondering if this Pierburg will replace the Bosch 3 bar fuel regulator .

http://www.buycarparts.co.uk/bmw/3-convertible-e30...

Yes BMW fitted both during production in the 80's

[TWB86]

Does anyone have a spare AFM to plenum elbow hose, hosing to fit the flame trap or heat shield to wrap around the induction hose? Am in the process of tidying the engine bay at the moment and there is some strange substance permanently ingrained on mine!

Beer tokens and postage covered of course...

T

[macdeb]

Hhmm, wonder what happened to my regulator
The one I sent 'urgent' next day, FOC and postage paid.

[SILICONEKID345HP]

macdeb said:

Hhmm, wonder what happened to my regulator
The one I sent 'urgent' next day, FOC and postage paid.

I was going to bring it with me to Shakey , a combination of a bad throat and the twins birthday stopped me in my tracks .

Sorry about that Mac ,i can post it back to you .

[s p a c e m a n]

Anyone got a spare bit of alloy trim that goes around the boot hinge or am I going to have to throw about £50 at racetech for what is probably a £5 bit of obscure pipe fitting

[macdeb]

SILICONEKID345HP said:

Sorry about that Mac ,i can post it back to you .

Cool

[Danblez]

Anyone got a roof panel bag going spare?

[J400GED]

Has anyone got a pair of original rocker cover TVR badges going spare?
..or I could possibly swap for a roof panel bag.

[CHIMV8]

Looking for a roof strut,currently using one off a different model tiv which is slightly to short.

JE400 how much would you want for the roof cover holder

[sapper]

Anyone got an oil sump going spare?

[wuckfitracing]

Yep off a 4.6.

[J400GED]

CHIMV8 said:

Looking for a roof strut,currently using one off a different model tiv which is slightly to short.

JE400 how much would you want for the roof cover holder

Do you mean me?