J400 GED Chimaera Chassis refurb
Discussion
Top Tip:
I forgot to mention this at the weekend but: if you have a GKN diff and need to replace a drive shaft CV joint bolt, make sure that you order the correct part.
On mine, the inboard joint threads in the diff output flanges are a coarser thread than those in the wheel hub flange.
It may be the same on the BTR diff.
I forgot to mention this at the weekend but: if you have a GKN diff and need to replace a drive shaft CV joint bolt, make sure that you order the correct part.
On mine, the inboard joint threads in the diff output flanges are a coarser thread than those in the wheel hub flange.
It may be the same on the BTR diff.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff