Rear brake caliper
Discussion
Is this the rebuild kit referred to earlier:
http://www.ebay.co.uk/itm/Ford-Sierra-XR4WD-Coswor...
i.e. a caliper repair kit for the Ford Sierra Cosworth 4x4?
http://www.ebay.co.uk/itm/Ford-Sierra-XR4WD-Coswor...
i.e. a caliper repair kit for the Ford Sierra Cosworth 4x4?
Steve I've checked and have both my original rear calipers, however the pad track width your refer to in your post is only 23mm (which I've also marked in yellow) ! but I'm sure the discs I removed (now discarded) were vented 283mm ! must say I'm a bit confused but have attached a photo anyway. Cheers, Richard
Edited by Richard 858 on Wednesday 4th March 13:40
Hi Richard, starting to dream about calipers, the 55mm dimension is the length of the ground area that the pads move along , I think you may have measured the gap, hope this makes sense, I have reassembled my old caliper with the new pins, so I can use the car until the new ones arrive, thanks for looking them out, the carriers are getting rare. Cheers Steve
Edited by Rowge on Wednesday 4th March 20:45
Gassing Station | Chimaera | Top of Page | What's New | My Stuff