New build

[phazed]

Soooo,

5.0
slightly higher compression
72mm plenum
bigger injectors
hairy cam
decent heads

Have i missed anything?

343bhp, 358 torques

Edited by phazed on Wednesday 8th July 10:35

[DangerousDerek]

phazed said:

Soooo,

5.0
slightly higher compression
72mm plenum
bigger injectors
hairy cam
decent heads

Have i missed anything?

343bhp

45mm ported inlet and trumpet base, roller rockers, full decat

[J400GED]

DangerousDerek said:

phazed said:

Soooo,

5.0
slightly higher compression
72mm plenum
bigger injectors
hairy cam
decent heads

Have i missed anything?

343bhp

45mm ported inlet and trumpet base, roller rockers, full decat

Obviously 357 then. Ta da!

[carsy]

359

[QBee]

I want it to be more, for your sake and the effort you have put in.....


But 322, and 355 torques.

[neal1980]

400 if you have a smoothbore pipe for sure

[J400GED]

DangerousDerek said:

So the date is booked for the rolling road session. We will also be fitting a set of Jenvey 412cc injectors beforehand.

So if anyone wants to have a guess at the figures there will be a prize for the closest

When is it booked in for?

[macdeb]

On Dales rollers, I'm with Q bee
[though will be a lot more with gas].

Edited by macdeb on Wednesday 8th July 16:43

[Sardonicus]

348 HP X 382 T

[phazed]

J400GED said:

When is it booked in for?

Reply from Derek;

" I am at Bailey Performance on 24th then onto Ten Of The Best the following day".

[J400GED]

phazed said:

Reply from Derek;

" I am at Bailey Performance on 24th then onto Ten Of The Best the following day".

[SILICONEKID345HP]

I think it will make 346.2hp N/A

[ClassiChimi]

Is it going to break the 500hp with Nos, what's your thoughts there?

[DangerousDerek]

ClassiChimi said:

Is it going to break the 500hp with Nos, what's your thoughts there?

Oh yes and then some

[Sardonicus]

ClassiChimi said:

Is it going to break the 500hp with Nos, what's your thoughts there?

easily

[ClassiChimi]

DangerousDerek said:

Oh yes and then some

I'm not much good with words but here goes,,,,,,fk me backwards with a bent stick

just to blow my brains out, what sort of torque on Nos,,,

What a feeling it must be Derek,,, I can see why you do all this graft,

[DangerousDerek]

I predict over 600lb/ft at 3500 rpm. The gearbox won't like that. That is something I need to upgrade over next winter.

[ClassiChimi]

That's going to bend a few things,,, go on boy, what box?
This is the best thread ever old chap
Can the diff and prop take it ?

[Alexdaredevils]

DangerousDerek said:

I predict over 600lb/ft at 3500 rpm. The gearbox won't like that. That is something I need to upgrade the next time i hit the gas

EFA

[ClassiChimi]

Alexdaredevils said:

EFA

EFA,,,, ? I know I'm thick but WTF