Very high long term offset
Discussion
The vac unit is on the side of the dizzy, connected by a pipe to the port just down stream of the throttle butterfly valve in the plenum neck.
Looks like this:
2 minutes with a dremmel and
There are two diaphragms in there.
The outer diaphragm from the dizzy wasn't in bad shape with only 1 hole but the inner was rather crispy and has lots of holes. The two weren't stuck together round the edge so I guess that the air was just going straight through it.
Looks like this:
2 minutes with a dremmel and
There are two diaphragms in there.
The outer diaphragm from the dizzy wasn't in bad shape with only 1 hole but the inner was rather crispy and has lots of holes. The two weren't stuck together round the edge so I guess that the air was just going straight through it.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff