What Geo

[jojackson4]

Looked and looked again
I have a man that has been recommended to sort the
Geo out on the chim
I would like some ideas on what set up your useing
Hopefully it will save me a 5 hour round trip
Thanks in advance
Peter

[bobfather]

Ride height is quite important as a first job because the suspension has unequal length wishbones. Rear 155mm, front 145mm outrigger corner to ground should give you horizontal lower wishbones

Rear
1.4 degrees neg camber
1.5mm toe in per side (12 minutes)
Front
3/4 of degree of neg camber
0.75mm toe in per side (6minutes)

Edited by bobfather on Thursday 8th October 07:51