Need help

Author
Discussion

ClassiChimi

12,424 posts

150 months

Friday 1st January 2016
quotequote all
To busy for that nonsense, hehe
See what we can do wink

jojackson4

3,026 posts

138 months

Friday 1st January 2016
quotequote all
Good to see
Good luck

ClassiChimi

12,424 posts

150 months

Saturday 2nd January 2016
quotequote all
Rich's engine bay is almost complete,, rad, expansion bottle and horns back in, air filter etc everything connected up, air intake system complete, dipstick back in,, took ages as I had to loosen manifold to allow passage,
Everything checked and nipped up, new oil filter and put about 4 litres of oil in the engine,, let it settle and I'll check again,

NOTE check steering arm ujs are tight and paint shaft and track control arms

Checked engine mounts and all wishbone + suspension is tight,,
It's ready to fill water system and PAS

some painting to do here and there,,

Other than a bit of wiring the engine bay is sorted.

Rich's knowledge and advise keeps me going and we identified various other tasks etc.

I panicked when I saw the car first time but I'm getting the feel now,, waiting on a Sparkle mate of Rich to sort the interior wiring but if Rich is feeling ok then we might just get on it sometime during the week ourselves,

Next big step will be to re mount dash lower section and get the clocks in place,, to do that we need to spray paint the front section of dash that has the vents in,, it's a change of colour so lots of little bits to do.

I'm very conscious of getting people here to help but the car not being ready,,,
I could name the people who have offered help and it's many,,, thanks so much boys,,
Being logical it's better to use people close to home so as Richard 858 is quite local....
RICHARD 858 can you be available on Wednesday and Thursday next week please.
I'll bell you mate.

We're waiting on a new mesh washer grill and stuff so certain things just can't be got on with or we'd be doing it.

Richie is a freak of nature, a breath of fresh air,, takes the piss like fk and I love it hehe I just turn the Denom stereo up biglaugh
Lads I don't want any thanks for this,, I'm at a loose end, I'm local, Rich insists on giving me a wage,,, more like penny washers if you ask me,, hehe so I'm not a saint, I'd do it for free cos it's such good fun but Rich helping me lets me concentrate rather than worry about some bills coming in. It's a privilege to be honest,,

I just want to see him drive the car.

There's not as much to do as I first thought,, as we are waiting on stuff it's just simpler for me andRich when he feels good to crack on.
We will need help when it comes to doors and bonet fitting etc so I'll till be asking at a later date.

I'm not happy the Sparks man can't get here for another week or so but hey,,,

There's loads of little jobs to do like mastic around rear lights etc.

It's Rich's car,, he wants to do it himself really,,, he's a rare man indeed.

It won't be long before this baby is running,,, that's fraught with fear mind, new cam, and crank shells so revving it to bed the cam in will be a nervous moment.

It's getting there though,,,, thumbup

Edited to add,,,, I should be in France with my hot girlfriend building a new life,,,,,but she fked me off hehe
Hey Rich,,, tell the lads how hot she was,,, but be careful what you say,,, I think she's still checking me out on here!!!!! biglaugh


Edited by ClassiChimi on Saturday 2nd January 19:34

sheel

Original Poster:

696 posts

224 months

Saturday 2nd January 2016
quotequote all
The mans mad!!!! Didn't feel too good today so left him to it most of the day(radiotherapy has no regard for the intricacies of rebuilding a chim..bd)
Aluns doing well,it's difficult for me letting him loose but hes making a good job and doing it as I would have wanted although his engineering prowness gives me a shudder at times,if he completes this with all digits intact it will be a miracle and he needed think he's going to have access to my workshop when I'm in that wooden box!! Told the missus don't let him over the boundary!!
Electrics maybe a bit of a pain but I had a bit of time this evening with another ph er looking over what I had left from the old lucas loom that I've left in the engine bay and it looks like I stripped all the right bits out and left the relevant bits in,I think
Know it will only be the lambas and tps that need sorting.....and of course the alarm....that's going to be the pig I think
Anyway hoping for a physically better day on my behalf tomorrow and we can make more progress,at least it looks like something is happening now
Rich

ClassiChimi

12,424 posts

150 months

Saturday 2nd January 2016
quotequote all
biglaugh it'll be sunny tomorrow, I'm just gonna drag Rich's wreck out the garage cos I have a few little jobs to do on my monster hehe
Engineering prowess,, my brackets better than yours which was all wrong,,, wink but he is right mind,,,

thumbup

Richard 858

1,882 posts

136 months

Saturday 2nd January 2016
quotequote all
Evening All,

I can do Wednesday & Thursday next week Al, I've confirmed on Facebook, just give me a call when you know for sure and if there's anything else you need, bits & bobs, tools etc. Looking forward to helping out. thumbup


ClassiChimi

12,424 posts

150 months

Saturday 2nd January 2016
quotequote all
Sound, thumbup

Tyre Tread

10,539 posts

217 months

Sunday 3rd January 2016
quotequote all
Hi Alun, got your message and sorry i missed your call. I understand but I will remain on standby and will feel a bit left out. weeping

you're doing a grand job mate - keep it up.

M500 NTH

13 posts

105 months

Sunday 3rd January 2016
quotequote all
I sold my chimaera 2 years ago and still lurk on the TVR section of the forum, so glad I have come across this story. Keep up the great work and updates

sheel

Original Poster:

696 posts

224 months

Sunday 3rd January 2016
quotequote all
Good pher Pete hiddlestone came round this afternoon and helped get the lower dash back in and the instrument back on and connected although we have got a few loose ends and plugs kicking about! Although in general it is a flipping rats nest int there,the alarm doesn't help and this is coming to be replaced anyway,also go a quandary with the tachometer as it's now going to run on canem,I will post a separate query about this as I'm sure the likes of blitz will have an answer
Rich

Toolbox200

131 posts

126 months

Sunday 3rd January 2016
quotequote all
Pleasure as always Rich.....constant supply of tea and some good banter...what could be better...good to see the chim coming together...looking great!!

Edited by Toolbox200 on Sunday 3rd January 19:20

sheel

Original Poster:

696 posts

224 months

Sunday 3rd January 2016
quotequote all
Pete,one might think you were only coming round to tat all the old bits of chimmy. You left the ecu behind!,,
Rich

Toolbox200

131 posts

126 months

Sunday 3rd January 2016
quotequote all
Nah....came round to see if I could find my tools that you put in your toolbox when we dismantled the chim all those months ago!! Will get the ecu next time...cheers!!

N7GTX

7,885 posts

144 months

Tuesday 5th January 2016
quotequote all
This has to be the best thread on here. Sheel (Rich) must be bloody strong to put up with all the abuse from ClassiChimi (Alun) never mind repair the car. I'm exhausted just reading all this banter. read
My advice Rich, is get a cattle prod and make the bugger work harder...idealaugh

QBee

21,023 posts

145 months

Tuesday 5th January 2016
quotequote all
What Rich will be searching for is that tool you get on Swiss Army knives, the one you use to get boy scouts out of horses hooves.
Without it he will never get a word in edgeways..... blabla

Tyre Tread

10,539 posts

217 months

Tuesday 5th January 2016
quotequote all
QBee said:
What Rich will be searching for is that tool you get on Swiss Army knives, the one you use to get boy scouts out of horses hooves.
Without it he will never get a word in edgeways..... blabla
That's why Scrabble was invented - so men could get a word in edgeways!

How's it going Alun. I'm still here on standby.

QBee

21,023 posts

145 months

Tuesday 5th January 2016
quotequote all
Tyre Tread said:
That's why Scrabble was invented - so men could get a word in edgeways!
rofl

sheel

Original Poster:

696 posts

224 months

Tuesday 5th January 2016
quotequote all
I think the shock to aluns system of doing several days consecutive "work" is getting too much for him,caught him laid on his back sniffing paint fumes and what looked like a big reefer hanging out of his chops..did shut him up tho also having to restrict his coffee intake ! Rich 838 is coming to help tomorrow and and alun had the cheek to say"that guy can't half talk!" Pot and black come to mind
In fairness hes doing well, lots of bits finished,managed to get some power onto the electrics today,no bonfires which was a plus and I seemed to so far have a fair bit working which is a good start,the bloody alarm and immobiliser are a pain so will have to put the thinking cap on but can probably link that out for the time being as engine wise it's not far off ready to run probably by the end of the week
Had a bit of a result as well at hospital today,after my last bout of cyberknife my brain man has said the 11 tumours he treated are all shrunk and all the tiny ones in the background are sitting stable, so having just had a nasty session of radiotherapy before Xmas which has bashed me about on the adrenal front,hes happy to leave me be for 2 months, it's funny to think "hey I've got at least 2 months of life left."...bit of a bonus!!
Will get some pics uploaded soon and without alum in his lederhosen and gimp mask!!
Rich

Richard 858

1,882 posts

136 months

Tuesday 5th January 2016
quotequote all
sheel said:
Rich 838 is coming to help tomorrow and and alun had the cheek to say"that guy can't half talk!" Pot and black come to mind
Rich
Now that sounds like a challenge if ever I've heard one !

See you both in the morning blabla

sheel

Original Poster:

696 posts

224 months

Tuesday 5th January 2016
quotequote all
Ha ha rich. That will be up to you to keep him in order tomorrow!! I'll just be the tea bh
Rich