Vacuum advance removal
Discussion
Paulprior said:
Hi Sardonicus, from your message I assume that there should be 2 screws, so probably someone has stripped the thread in one, maybe I can re thread it the next size up.
Before removing the HT leads to let me get the dizzy cap out of the way I thought I would mark the positions, when I look in the bible I should have this
But when I look at my dizzy I have this
Have I just misinterpreted the bibles bit on the right as the vac advance unit and the locating springs or is it an different model to mine from 95?
Paul
It's probably fine, my firing position is like that, probably from me removing the dizzy one time when changing cam. Before removing the HT leads to let me get the dizzy cap out of the way I thought I would mark the positions, when I look in the bible I should have this
But when I look at my dizzy I have this
Have I just misinterpreted the bibles bit on the right as the vac advance unit and the locating springs or is it an different model to mine from 95?
Paul
Edited by Chimp871 on Tuesday 17th July 08:10
Gassing Station | Chimaera | Top of Page | What's New | My Stuff