ACT plenum twin throttle body

[SILICONEKID345HP]

Mr Haribo said:

I run a 4.5/4.6L with a triple plenum, it is over the top for a 4.5L so a double would suit it better I'm told using half throttle is enough.




The above is with the triple and coil packs etc I had 330BHP with out the triple and running on a Mark Adams chip so not much of a gain for the out lay

Did you have the larger 72mm or standard 4.5 plenum fitted prior to the fitting of the triple ?

[Mr Haribo]

Daz, I had the bigger 73mm from V8 Developments with the 5L inlet manifold and carbon trumpets, bring on the trumpets !

[ChilliWhizz]

SILICONEKID345HP said:

I think the JE triple would work well on my setup.

Works well on mine

[ChilliWhizz]

Matthew Poxon said:

You are more than welcome to take mine for a spin and see what you think.

You might want to consider rewording that offer Matthew

[QBee]

ChilliWhizz said:

Matthew Poxon said:

You are more than welcome to take mine for a spin and see what you think.

You might want to consider rewording that offer Matthew

Yes, precisely.....I am king of the spins around here