4 pot calipers ?
Discussion
Can any of your clever people out there tell me if these will fit my 96 4.0ltr ?
http://cgi.ebay.co.uk/Ford-Sierra-Cosworth-Brake-C...
Thanks, Roy
http://cgi.ebay.co.uk/Ford-Sierra-Cosworth-Brake-C...
Thanks, Roy
Anything is possible but if you want to keep the 240mm,278mm or 283mm(not stock)discs then no,i tried and you would have to machine so much off the calliper lugs they would become to weak in that area and dangerous in my opinion,but its not all bad they are overweight and not worth the hassle(that does not include aftermarket or TVR)the pad swept area is fairly small for 4 piston units too,i had a set and stuck them on Ebay and went another route
Hallo
I put together quite a few upgrades using the TVR/AP Caliper.Sold them also in combination with the 5-stud Spiderconversion. Disc size 300 x 28 mm.see picture below if it works.It is a well known kit.
I can put together an other kit. The problem is finding used TVR/AP calipers nowadays ( at the right price). So I bougth some new ones to make a kit. As mentioned for this kit you will need 16 inch wheels. If some is interested I will trow in 16 inch Imola's at a very good price ( mint wheels-no dents etc)If the picture doesn't show up I'am happy to send by E-mail again.
greetings and Merry Chistmas and a happy New Year.
Hans.
I put together quite a few upgrades using the TVR/AP Caliper.Sold them also in combination with the 5-stud Spiderconversion. Disc size 300 x 28 mm.see picture below if it works.It is a well known kit.
I can put together an other kit. The problem is finding used TVR/AP calipers nowadays ( at the right price). So I bougth some new ones to make a kit. As mentioned for this kit you will need 16 inch wheels. If some is interested I will trow in 16 inch Imola's at a very good price ( mint wheels-no dents etc)If the picture doesn't show up I'am happy to send by E-mail again.
greetings and Merry Chistmas and a happy New Year.
Hans.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff