Getting the dam door trim off! grrrrrrrr
Discussion
I'd challenge the requirement for child like arms to perform this task as I've done it without much issue. And to give you an idea of my "frame", am an ex rugby player/martial arts student, 172cm tall and weighing in at 95Kg, am no dainty wall flower
2 points that will make this straight forward.
1. Have the window up
2. Look at the photos earlier in this thread to know where the bolts are that you are reaching for
As a side note my door cards are different. One side has the 4 bolts indicated, the other only 3 - furthest bolt not present. what took me time was trying to reach a bolt that was not there
2 points that will make this straight forward.
1. Have the window up
2. Look at the photos earlier in this thread to know where the bolts are that you are reaching for
As a side note my door cards are different. One side has the 4 bolts indicated, the other only 3 - furthest bolt not present. what took me time was trying to reach a bolt that was not there
OK, time for a really dumb question... Earlier post here states if ashtray is fitted, there's a screw behind it. My car doesn't have ashtrays so there MUST be no screw. Right? Or have Door Pullers United found a sneaky one elsewhere instead? I'm assuming the 'no ashtray' model simply omits this one.
When it comes to the screws, I believe no standard. My two door cards varied in number of screws and their placement, The only common screw location was the ashtray. I think the outer part should just lift away fairly easily once you've removed the nuts, revealing the location of any screws on the inner panel.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff